DSpace Repository

Browsing Project Report by Title

Browsing Project Report by Title

Sort by: Order: Results:

  • Rana, Sohel; Sarker, Faisal (Daffodil International University, 2019-09)
    The Project on study on knit Garments merchandising it’s based on the most important section in the knit garments industry. This section can compare with the hart of body. Without this section someone can not get any order, ...
  • Shakil, Headauat Ullah; Sifath, Shahiduzzaman (Daffodil International University, 2021-09-17)
    The Garments, Apparel, and Knitwear Industry contributes more than 84 percent of Bangladesh's export revenues. The goal of this thesis is to give a comprehensive review of garment merchandising, as well as a resource and ...
  • Reza, Md. Safal Khan; Tarafder, Hosne Mobarak; Rahat, M. (©Daffodil International University, 2021-05-17)
    The Project on study on knit merchandising it’s based on the most important section in the knit industry. This section can compare with the hart of body. Without this section someone cannot get any order, and then it is ...
  • Islam, Md. Zahidul (Daffodil International University, 2012-04-18)
  • Amin, Md.Ruhul; Hassan, Md.mahmudul; Rahman, R- (Daffodil International University, 2012-12-12)
    This paper present the analysis and modeling There are many kinds of knitted fabric produced in our country. Quality and production of Knit fabric depends on the machine quality. Different number of needle, machine ...
  • Huq, S.M.Zahidul (Daffodil International University, 2019-02-15)
    What cloths are made in aBoutique shops/ tailor shops and what are the requirements of trimmings. How much clothes are needed, how much yarn is needed and what machines are needed in the tailoring shops. What is the skill ...
  • Topu, Md. Mostafijur Rahman; Hossain, Md. Miraj; Ahmed, Hasan (Daffodil International University, 2018-04-04)
    This report presents the machine stoppage in sewing floor. Sewing machine stoppages cause loss of garments production. Sewing machine stops due to different causes. In this work it was found that the causes of stoppages ...
  • Asadullah, Asadullah; Ahmmed, Risvi; Mitu, Sumia Gulshan (Daffodil International University, 2018-12-26)
    The report represents the manufacturing process of Ladies Shirt in Woven garments industry. The assessment is done in ‘Ladies Shirt” which bearing style number is “803481”. For assessment data has collected from cutting, ...
  • Al-Amin, Md.; Sadek, Sabrina (Daffodil International University, 2018-12-09)
    This report represents manufacturing process of cotton t-shirt. The assessment is done in cotton Tshirt which bearing style number is 2032944. For assessment the collected data cutting, printing, sewing, finishing. From ...
  • Rony, Md. Redwanur Rahman; Habib, Md. Ahsan (Daffodil International University, 2021-03-30)
    This project is „“Study on Manufacturing Process of Swimwear’’ of “Euphoria Apparels Limited” Garments (swimwear) manufacturing is totally different from any other garments manufacturing. It’s not a regular production ...
  • Hassan, G.M.Thowker; Islam, Md. Khairul (Daffodil International University, 2018-11-10)
    The textile factory in Bangladesh, specially the knit industries, where a huge amount of knit fabric is produce in daily basis. There also numerous types of raw material like yarns, various types of count of yarn are ...
  • Hossen, Md. Khobaeb; Ashikuzzaman, Md.; Tariqul Islam, Md. (Daffodil International University, 2020)
    Bangladesh's export earnings carry more than 76% contribution from the Garments, Apparel, and Knitwear Industry. The objective of this thesis is to provide an extensive overview of Garments Merchandising, as well as a ...
  • Masum, Md. Shahinuzzaman; Hasan, Md. Amit (Daffodil International University, 2018-12-26)
    Bangladesh's export earnings carry more than 78% contribution from the Garments, Apparel, and Knitwear Industry. The objective of this thesis is to provide an extensive overview of Garments Merchandising, as well as a ...
  • Alamin, Md.; Rahman, Md. Hasibur (Daffodil International University, 2019-06-02)
    NPT in Industrial Engineering term is Non-Productive Time. The time that is spent by an operator without producing any garment (standard minutes) like 'set up time' is called nonproductive time. This is the major problem ...
  • Hoque, Arshe Nur; Himu, Md. Rakibul Hasan (Daffodil International University, 2018-04-04)
    Denim is a well establish fashion in garments industry. Its demand is still increasing due to different outlook of different wash. Enzyme-stone wash and Bleach wash are one of those types of wash. This thesis is done to ...
  • Billah, Masum; Rahman, Md.Tarif (Daffodil International University, 2018-04-15)
    On this study was complete by the production process of double jersey knitting machine . and this article are focused on interlock and rib structure and how this type of machine are work. We also focus about different type ...
  • Sikder, Md Mahbub; Mamun, Hasan Al (Daffodil International University, 2019-12)
    We worked on the report of Original Marine. This report presents the final table inspection and final inspection report while producing different types of Kids wear. Different clothing defects are also presented in ...
  • Bepary, Bidhan Chandra; Islam, Md.Jahirul (Daffodil International University, 2018-04-10)
    Quality may be defined as the level of acceptance of a goods or services. In Bangladesh, different garments factory follow different quality control and management systems especially different inspection systems for garment ...
  • Hasan, Md. Anamul; Islam, Md. Nazrul (Daffodil International University, 2017-01-22)
    © Daffodil International University 1 CHAPTER-1 EXECUTIVE SUMMARY The internationally recognized Buyers or clients are looking for those countries for producing their apparel products where different types of mills have ...
  • Islam, Md. Ashraful (Daffodil International University, 2019-05-10)
    My Thesis Topic is Study On “Quality Control in Cutting Section’’ for collecting Fabric inspection data of N.A.Z Bangladesh Ltd. In this project I have prepared based on the Fabric Cutting procedure, Fabric Inspection, ...

Search DSpace


Browse

My Account