Project Report: Recent submissions

  • Mou, Taufika Akter; Bhuiyan, Nasim Kabir (Daffodil International University, 2021-06-02)
    To finish our project job, we first collected some defected fabric pictures from Liz Fashion Industry Limited, Magpie Knit Composite. In knitting floor, dyeing area, finishing floor, and inspection section. Then we divide ...
  • Hasan, Abdullah (Daffodil International University, 2021-11-24)
    This thesis report present Study on Non-Productive Time (NPT) in Knit Garment Production. Has worked on this report because of non productive time (NPT) is the main reason for low production . It has been observed 8 hours ...
  • Biswas, Dip; Singha, Redoy (Daffodil International University, 2021-11-02)
    The project is on Comparative study on development sample for various buyer. We know the large and most important section in garments industry is sample development. We made a study on 3 buyers development sample to know ...
  • Ahmed, Md Parvez; Dey, Shajib (Daffodil International University, 2021-09-17)
    Sewing methodology is one of the most important stages in the creation of garments. During the assembly process in the sewing system, a few faults or deformities may occur, resulting in a low quality of the clothing item. ...
  • Siraji, Md. Masud Ibne (Daffodil International University, 2021-11-14)
    This report presents the Comparative Study on Measurements found in Sample and Final Inspection. Has worked on this topic because through measurement can prepare comfortable and fit garments. It has been observed that ...
  • Shakil, Headauat Ullah; Sifath, Shahiduzzaman (Daffodil International University, 2021-09-17)
    The Garments, Apparel, and Knitwear Industry contributes more than 84 percent of Bangladesh's export revenues. The goal of this thesis is to give a comprehensive review of garment merchandising, as well as a resource and ...
  • Mondal, Sujon Kumar (Daffodil International University, 2020-12)
    Presently a day’s Garments imperfection is perhaps the main components of the clothing fabricating industry since it makes significant impacts on genuine efficiency. This paper is shows various sorts of deformities which ...
  • Sakib, Muhibbul Mowla; Ovi, Iftakhar Islam (Daffodil International University, 2021-05-31)
    Apparel manufacturing factories are facing the global competition of cost-saving, productivity, and quality improvement. Industrial Engineering is dealing with these factors to reach the highest level of productivity, ...
  • Rana, Sohel (Daffodil International University, 2021-06-30)
    Garment sample is merely important and is developed before starting the bulk production. It refers that making a sample of the garment that need to be satisfactory to the buyer. Sampling is one of the prime processes in ...
  • Islam, Md. Muzahidul; Ahsan, Md.; Hasan, Md. Bakhtiar (©Daffodil International University, 2020-11-25)
    This project report present study about Color fastness evaluation of different fabrics (eg. cotton, viscose & jute) dyed with reactive dye. During this report we collect data from Daffodil international University textile ...
  • Sarkar, Abu Hossain; Rahman, Md. Minhazur; Antu, Md. Asif Sazzad (©Daffodil International University, 2020-11-04)
    The project is on the "Quality problems in Denim Production. This study examines what's vital for prime quality of Denim, and what processes and factors affects the intrinsic quality of the Denim material. supported this, ...
  • Reja, Md.Samim (Daffodil International University, 2021-04-15)
    The most common and widespread process applied to fabrics during wet processing is bio-polishing to reduce Hairiness, and making the surface of the fabric smoother. The bio-polishing of fabrics to remove hairiness It ...
  • Khandakar, Md. Ashik (Daffodil International University, 2020-01-31)
    This project is the greatest importance of any RMG industry. This paper represents the use of various tools and techniques for taming apparel sewing section efficiency throughout the production process. Now a day’s apparel ...
  • Amin, Md. Ruhul; Hossain, Ismail; Masud, Md. Obaidullah Al (Daffodil International University, 2020-12-31)
    This project is on “Application of Industrial Engineering In Garments Sewing Floor”. Traditionally operated garment industries are facing problems like low productivity, longer production lead time, high rework and ...
  • Shorgo, Md. Ashikulla (Daffodil International University, 2020)
    On this assessment was done particular sorts of single and twofold pullover machine issues and this article are loped around wastage and how such a deficiencies can be diminished. I similarly focused about different sort ...
  • Sen, Sufal; Sarker, Shabuj Kumer (Daffodil International University, 2020)
    In this study dyeing of 100% cotton knit fabrics were performed by using reactive dye at different shade percentages (2.0%, 4.0%, 6.0% & 8.0%).Exhaust dyeing method was applied in the experiments for 100% cotton knitted ...
  • Tanim, Rifat Mahmud; Ibne Ahmed, Reduan; Farsee, Md. Salman (Daffodil International University, 2020)
    The main point of our project is to observe the process of dyeing different fabrics with a natural dye and various wet testing like wash, Rubbing, Water, Perspiration, & Light fastness etc. We have noticed a significant ...
  • Sen, Sufal; Sarker, Shabuj Kumer (Daffodil International University, 2020-12)
    In this study dyeing of 100% cotton knit fabrics were performed by using reactive dye at different shade percentages (2.0%, 4.0%, 6.0% & 8.0%).Exhaust dyeing method was applied in the experiments for 100% cotton knitted ...
  • Rana, Md. Sohel (Daffodil International University, 2020)
    This thesis report contains the all types of washing process and washing effect on denim garments of the industry. We have visited to ADTL collecting the related information for different type of washing process. After ...
  • Wahid, Md. Alvi; Ghosh, Nupur Rani; Akter, Sharmin (Daffodil International University, 2018-12-31)
    The aim of the study was to determine the effects of WPI, CPI, loop length, GSM, thickness of knitted fabrics on comfort parameters including air permeability. For this purpose, comfort properties of 100% cotton single ...

Search DSpace


Browse

My Account