DSpace Repository

Green synthesis and characterization of gold nanoparticles from discarded computer PCBs on reduction of environmental pollution

Show simple item record

dc.contributor.author Mondal;, Pronoy
dc.contributor.author Salman Haque, Mohammad
dc.contributor.author Ghose, Biswajit
dc.contributor.author Afridi, Ahsan Ahammed
dc.date.accessioned 2025-11-16T05:49:52Z
dc.date.available 2025-11-16T05:49:52Z
dc.date.issued 2024-05-09
dc.identifier.uri http://dspace.daffodilvarsity.edu.bd:8080/handle/123456789/15636
dc.description Article en_US
dc.description.abstract The economic value of gold content in electronic waste, particularly waste printed circuit boards (PCBs), has generated interest in recovering gold from this material. Unfortunately, due to the severe environmental hazards associated with such waste, there is a pressing need for efficient and selective methods of gold nanoparticle recovery. A novel technique has been developed to synthesize gold nanoparticles that employ chlorate leaching and Punica granatum extract to minimize the environmental impact of electronic waste. Multiple analytical methods, including UV-Vis, XRD, EDS, SEM, and TEM analysis, were utilized to identify and characterize the extracted gold nanoparticles. The UV-Vis spectrum showed GNP-absorption peaks at a narrow range of wavelengths, primarily at 520 nm, confirming the formation of gold nanoparticles from the e-waste. The XRD analysis identified the material as metallic gold with characteristic peaks of gold crystals (111), (200), (220), and (311), corresponding to the FCC crystal structure. The SEM and TEM analysis revealed that most of the Au nanoparticles were less than 40 nm in size, with some larger particles resulting from the agglomeration of smaller ones. The EDS spectrum analysis indicated that the gold atoms emitted strong signals. At the same time, other elements such as carbon, oxygen, and metals such as Sn, Zn, Pd, Cu, and Cd showed weaker signals. The recovered gold nanoparticles were found to have a bandgap of 2.2 eV, indicating that they are a direct bandgap semiconductor suitable for use in optoelectronic applications. The environmental impact of the PCBs and the chemicals used in the process were also analyzed to address the necessity of using discarded electronic waste to reduce environmental pollution. The proposed method showed high efficiency for extracting gold nanoparticles from e-waste, with simple process steps, low chemical usage, and low cost, as demonstrated by the results. en_US
dc.language.iso en_US en_US
dc.subject Nanoparticle en_US
dc.subject Optoelectronic applications en_US
dc.subject Environmental pollution en_US
dc.subject Environmental impacts en_US
dc.subject Printed circuit board en_US
dc.subject Energy dispersive X-ray spectroscopy en_US
dc.subject Scanning electron microscopy en_US
dc.subject X-ray diffraction en_US
dc.subject UV-visible spectroscopy en_US
dc.title Green synthesis and characterization of gold nanoparticles from discarded computer PCBs on reduction of environmental pollution en_US
dc.type Other en_US


Files in this item

This item appears in the following Collection(s)

Show simple item record

Search DSpace


Browse

My Account