DSpace Repository

Browsing Faculty of Engineering by Title

Browsing Faculty of Engineering by Title

Sort by: Order: Results:

  • A Comparison of Characteristics of Waste Plastic, Crumb Rubber and Polymer Modified Bitumen Based on Previous Studies 
    Rakhi, Nusrat Jahan; Mridha, Abdul Ahad; Bristy, Sharmin Nahar; Murad, Md. Saiful Islam (Daffodil International University, 2021-01-21)
    Transportation plays an important role in the rapid economic development of a nation. Transportation increases the quality and variety of consumer goods, thereby stimulating the demand and development of trade and economy ...
  • Comparison of Cost and Suitability of Using Raft and Pile Foundation for Building 
    Hasan, Md. Labidul; Barman, Mithun Chandra; Ghosh, Joy; Hossen, Md. Shakil (Daffodil International University, 2021-01-31)
    The two parts of the building are the superstructure and substructure. Carries all types of loads on the building to the foundation carrying superstructure and substructure. Raft and pile foundations are becoming ...
  • Comparison of Ongoing Roadway Maintenance Projects by Roads and Highways Department 
    Bappi, P.M. Shishir Ahmed (Daffodil International University, 2019-12)
    Road networks in Bangladesh are spending much faster than relative budgets and institutional capabilities. Generally, projects review various aspects of road maintenance. In the end, kilometers are studied for different ...
  • Comparison of Particle Swarm Optimization Based MPPT Controller with Conventional MPPT Controller for PV System 
    Islam, Md. Shihabul; Sadiquzzaman, Md. (Daffodil International University, 23-04-01)
    The MPP (Maximum Power Point) of a photovoltaic system is not constant because it relies on the ambient temperature, solar radiation and load impedance. PV modules have a point at which they can reach their MPP under any ...
  • Comparison of Sewing Productivity Among Different Sewing Floors 
    Kundu, Rajesh Kumar; Hossain, Md. Farhad (Daffodil International University, 2019-09-06)
    This project is the greatest important of any RMG industry. This paper represents the use of various tools and techniques for taming apparel sewing section efficiency throughout the production process. Now a day‟s apparel ...
  • Comparison of Sewing Productivity Among Different Sewing Floors 
    Khandakar, Md. Ashik (Daffodil International University, 2020-01-31)
    This project is the greatest importance of any RMG industry. This paper represents the use of various tools and techniques for taming apparel sewing section efficiency throughout the production process. Now a day’s apparel ...
  • Comparison of Sewing Productivity Among Different Sewing Floors 
    Kundu, Rajesh Kumar; Hossain, Md. Farhad (Daffodil International University, 2019-08)
    This project is the greatest important of any RMG industry. This paper represents the use of various tools and techniques for taming apparel sewing section efficiency throughout the production process. Now a day‟s apparel ...
  • Comparison of the Physical Characteristics of Sweater Knitted Fabrics Produced of Acrylic and Acrylic-Cotton Ply Yarn 
    Das, Aditi (Daffodil International University, 23-06-18)
    Good fabric appearance and clothing comfort are important criteria for consumer. At the future new natural healthy and ecological textile products gain importance. The final usage of knitted fabric is significantly ...
  • Competitive study between Natural dye and Synthetic dye in case of dying of 100% Nylon fabric 
    Shihab, Shamim; Safwan, Asif Ahmed (Daffodil International University, 2018-04-01)
    This study was aimed to make a comparison between natural dyes and synthetic dyes based on different fastness properties and the costing of the dyes and their dyeing procedure. We used turmeric powder as our natural dye ...
  • Competitive Study on Manual and Automatic Fabric Spreading and Cutting Process 
    Swapan Ahmed; Azizur Rahman, Md. (Daffodil International University, 2019-12-06)
    Spreading is the process of super imposing lengths of fabric on a spreading table, cutting table, or specially designed surface in preparation for the cutting process. Fabric loss resulting from the cutting and spreading ...
  • Compliance in RMG Sector: In-depth Study on Different International Standards & Organisations 
    Lima, Suraia Khanom (Daffodil International University, 2012-04)
    Over the last years, Ready Made Garments (RMG) sector experienced impressive growth rates and specifically woven and knitwear products are in high demand by the USA and European markets. Adherence with national and ...
  • Compliance issues of garments industry-a study on BSCI audit reports 
    Hasan, Md. Mahedi; Tanvir, A.B.M. (Daffodil International University, 2018-07-29)
    Bangladesh's export earnings come from more than 76 percent of the garment industry. Its Plays a big role in the national economy. So there are many maintenance requirements in this sector. In RMG factories, lower literacy ...
  • Comprehensive Study On Knit Garments Merchandising In Apparel Industry 
    Rahman, Md.Fayzur; Gani, Md.Mafuzul; Kamruzzaman, Md. (Daffodil International University, 2011-10)
    Merchandising is that part of marketing that brings together a series of marketing techniques as well as product promotion techniques in shops. Synthetically we can call merchandising the art of selling. This syntagme ...
  • Configuring EGSM over the Existing GSM Network 
    Ashraful, A. K. M.; Ruble, Mohammad Neamat Ullah (2014-08-04)
    This project is on “Configuration EGSM Over the Existing GSM Network”. Wireless cellular communication is witnessing a rapid growth in markets, technology, and range of services. A major current thrust for cellular ...
  • Construction and Design of Automatic Ruti Maker 
    Al-amin, A.K.M.; Bala, Comus (Daffodil International University, 2019-12)
    One of the most innovative products for today’s world is Automatic Ruti Maker. The mechanical part of this machine is very simple to look at and the application of software is also very easy to understand to the users ...
  • CONSTRUCTION AND DESIGN OF WIRELESS TACHOMETER 
    Hasan, MD. Imam; Rahman, Manjuma (Daffodil International University, 2018-11-01)
    For measuring the rotation celerity of a shaft or disc in a motor based device using a technique can be done by a microcontroller predicated tachometer. The technique what is used referred to a processes which is embedded. ...
  • Construction and Design of Wireless Tachometer 
    Hasan, MD. Imam; Rahman, Manjuma (Daffodil International University, 2018-11)
    For measuring the rotation celerity of a shaft or disc in a motor based device using a technique can be done by a microcontroller predicated tachometer. The technique what is used referred to a processes which is embedded. ...
  • Construction of a solar PV System 
    Mahamud, Md. Nahid; Awal, Md. Shofiul (2014-07-07)
    We hereby declare that the thesis titled “DESIGN and Simulation of a Solar PV System” for “Daffodil International University” submitted to the Department of Electrical and Electronics, Dhaka, in partial fulfillment of ...
  • Construction of Automatic Solar Tracking System 
    Hossain, Md. Monowar; Hossain, Md. Anwar (2014-07-07)
    Solar energy is one of the popular renewable energy nowadays. It is consider as total free and clean energy source since the sun is estimated still able to exist for more 5 years. In addition, some natural resources like ...
  • Construction of Dual Axis Solar Tracker Device System 
    Meshel, Md.Omur Faruque; Islam, Md.Tariqul (Daffodil International University, 2018-11)
    These days, Sunshine risen board has been fulfilled gradually as of late to change above sun risen vigour to electrical vigour.The sun based board can be fulfilled either as an independent case or as a hugely goliath ...

Search DSpace


Browse

My Account