Faculty of Engineering: Recent submissions

  • Hossain, Md. Monowar; Hossain, Md. Anwar (2014-07-07)
    Solar energy is one of the popular renewable energy nowadays. It is consider as total free and clean energy source since the sun is estimated still able to exist for more 5 years. In addition, some natural resources like ...
  • Kabir, Md:Humayan; Shawn, Md.Shahriar (2014-07-07)
    We hereby declare that this project report on “AC to DC mini ips” is submitted to Daffodil International University for partial fulfillment of the requirement of the degree of B.Sc. in Electrical & Electronic Engineering. ...
  • Mahamud, Md. Nahid; Awal, Md. Shofiul (2014-07-07)
    We hereby declare that the thesis titled “DESIGN and Simulation of a Solar PV System” for “Daffodil International University” submitted to the Department of Electrical and Electronics, Dhaka, in partial fulfillment of ...
  • Sarowar, Md. Alvi; Majumder, Md. Hasan Imam (2014-07-07)
    As technology is advancing the consumptions of power is steadily rising. There are three steps for proper electrification these are:- 1.1 Electric Power generation. 1.2 Electric Power Transmission. iii) Electric Power ...
  • Islam, Md.Takmilul (2014-07-07)
    This thesis is on “Tariff Calculation of Electric Powe r (Generating cost calculation)” The tariff structure would consist of two parts. In the solicited bids, the bidders shall offer bulk power tariff based on the ...
  • Raihan, A.S.M. Shakhawat; Arefin, Md. Sium (2014-07-07)
    In this paper utilization of MATLAB software for control of photovoltaic power using Maximum Power Point Tracking (MPPT) control mechanism. The main aim of the thesis is the conditioning system of solar-PV using design ...
  • Kabir, Md Humayun; Alam, Md Asraful (2014-07-07)
    Newly, smart card technology are bring used in a number of around the world, on the other hand security has become significant in information technology. But there are few sectors in our country where security system has ...
  • Chowdhury, Md. Shahidullah Kouser; Fakir, Mohammad Monowar Hossain (2014-07-06)
    Cell Phones have became an essential in our lives and made their own single stand. Once regarded as luxury is now the thing nearest to our hearts. The mobiles even replaced the wrist watches which people find it now ...
  • Chowdhury, Istiak Ahmed (2014-07-06)
    With the advancement in technology, the number of electronic devices in our day-today lives has increased to make life simpler. So a necessity to construct a Universal Remote System that will easily control all these ...
  • Rumi, Abdullah-Al-; Hossain, Md. Imran (2014-07-06)
    In this project we basically worked on the very basic of computer networking, we went to the root level of the networking process how the things are done behind the interface. We discussed about different types of internet ...
  • Rahman, Md. Hafizur; Rahman, Md.Habibur (2014-07-06)
    Digital equipment such as computers, telecommunication systems and instruments use microprocessors that operate at high frequencies allowing them to carry out millions or even billions of operations per second. A disturbance ...
  • Hasan, Md. MehediAl; Bhuiyan, Md. Touhidul Islam (2014-07-06)
    Here we make a variable DC power supply and the main working principle of this project is full wave rectification which is done by bridge configuration. Where we are using 4 diodes and those rectifies the output of the ...
  • Mostafa, Sheikh Mohammad; Alam, Md. Fokhrul (2014-07-06)
    In this thesis, the advantages of two different maximum power point tracking (MPPT) algorithms has been investigated for a sound solar photovoltaic power conditioning system. By simulation, the performance and efficiency ...
  • Islam, Muhammud Atikul; Dewan, Md. Zahid (2014-07-06)
    We do solemnly declare that the work presented in this thesis entitled "Study of a low cost Electro Surgical Diathermy Machine" was carried out by us and was not previously submitted to any other University for an academic ...
  • Ibrahim, Md. Iftekhar (2014-03-09)
    The term “textile” derived from the Latin textilis and the French texere, meaning “to weave,” and it originally referred only to woven fabrics. It has, however, come to include fabrics produced by other methods. Thus, ...
  • Ashik, Md. Ashikur Rahman; Afrad, Saimum; Kaiser, Sarker Mahid (2014-03-09)
    Sewing process is one of the most important stages in labour intensive ready-made clothing enterprises. Quality faults occurring during this process adversely affect the product quality and product efficiency, and also ...
  • Newaz, Mustarin; Mitu, Tanzina Islam (2014-03-09)
    Over the last years, Ready Made Garments (RMG) sector experienced impressive growth rates and specifically woven and knitwear products are in high demand by the USA and European markets. Adherence with national and ...
  • Biswas, Ribon Kumar (2014-03-08)
    The tremendous success of readymade garment exports from Bangladesh over the last two decades has surpassed the most optimistic expectations. Today the apparel export sector is a multi-billion-dollar manufacturing and ...
  • Islam, Md.Ashiqul (2014-03-08)
    Textile and garments sector is the biggest and fastest growing sector in Bangladesh. It is also the highest foreign currency earning sector in Bangladesh. Among this sector, Knit garment is growing very rapidly due to ...
  • Kundu, Supriya; Nahar, Kamrun (2014-03-02)
    In this study I try to find out the contribution of social compliance practices for work environment development and its role for worker’s job satisfaction. Another reason is to prepare a report for the fulfillment of ...

Search DSpace


Browse

My Account