Faculty of Engineering: Recent submissions

  • Bhowmik, Sourav Ranjan; Barua, Amit (Daffodil International University, 22-08-30)
    The core intention of this project is physical involvement in the Meghna Knit Composite Ltd. and work about “Different Types of Sewing Faults: A Study on Meghna Knit Composite Ltd.” Solving problems through practical ...
  • Jinnah, Hashibul Alam; Shahed, MD. Hossen; Al Amin, Md. Rahim; Hossain, Syed Mushaid (Daffodil International University, 22-09-17)
    The leading cause of death for young people in the world between the ages of 16 and 24 is motor vehicle accidents. Bangladesh ranks among the highest global rates of traffic fatalities. The capital city of Bangladesh, ...
  • Juma, Jasmin Akter (Daffodil International University, 22-10-01)
    Bangladesh's need for power is growing every day. Due to increasing population density, energy is being used quickly, which will cause the conventional energy supplies to run out rapidly. To satisfy rising demand, it's ...
  • Ali, Md Sehab; Zaman, Md Mehedi; Koushik, Md Kabidul Islam; Sarker, Chandra (Daffodil International University, 22-10-01)
    There are both motorized and non-powered vehicles in Bangladesh traffic. In the absence of lane rules and unrestrained mixing of different types of vehicles, the character of the traffic stream becomes heterogeneous. In ...
  • Sajal, Rezwan Maruf (Daffodil International University, 22-10-01)
    "Empirical Study on Network Configuration and Monitoring Using MikroTik Router at Daffodil Online Ltd. (DOL)" is the topic of this study. This type of wireless network allows a network administrator to gain control over ...
  • Hasnat, Abul; Ahammed, Fawsal; Rahman, Mizanur; Rahman, Habibur (Daffodil International University, 22-09-01)
    The leading cause of death worldwide is road traffic accidents (RTA). Even though just 54% of the world's registered vehicles come from low- and middle-income nations, 90% of road traffic deaths (RTD) occur in these nations. ...
  • Biswas, Shakirul Islam (Daffodil International University, 22-09-01)
    The analysis of the Slum area visits explored in this work. I visit the place and watched their lifestyle. I study about sanitization, did research, and collect previous data through NGO and internet research. For a healthy ...
  • Prodhania, Muhammad Rakib; Chowdhury, Md Emon; Shah, Md Nayeem (Daffodil International University, 22-08-01)
    In this report, statistical and salient features have been extracted for acoustic signals in medical and educational applications. In recent 2 to 3 years, the whole world has witnessed a lockdown in the COVID-19 situation. ...
  • Rahaman, Md. Owasifur; Rahman, Md. Mahbubur; Uddin, Raise (Daffodil International University, 2022-01-15)
    The paper is on “Study on Different Types of Wet Washing on Denim Garments”. Here 100% cotton denim fabrics were selected to carry out the experiment. Different dry process like Destroy, Tagging, Whiskering, Resin, 3D ...
  • Adnan, Md. Oahedullah Khan (Daffodil International University, 2021-12-30)
    Bangladesh is a developing country. the biggest problem that interrupts the developing of Bangladesh is the shortage of electricity. This mostly occurs in the rural areas of the country. Electricity has not yet reached ...
  • Islam, Md. Ashraful; Hosen, Md.Shohan; Mia, Md.Mamun (Daffodil International University, 2022-01-12)
    This project is ‘Study on sewing problem and their remedies’ of “KAC Fashion Wear Ltd.” Garment manufacturing is quite different from any other conventional manufacturing. It is not a continuous production method. Each ...
  • Mondal, Md. Selim; Rana, Md. Masud; Hossain, Md. Jobaer (Daffodil International University, 2021-09-12)
    This thesis paper contains the overall procedure of SMV and operation bulletin of the garments industry. Have visited to knit valley Fashion Ltd. collecting the SMV and its related data. Completed in time study, production, ...
  • Muhumed, Khadar Mohamed (Daffodil International University, 2022-03-01)
    In this project, an 8-story T-shaped building model was analyzed with various slab thicknesses and column sizes in ETABS software (ETABS - Documentation - Computers and Structures, Inc. - Technical Knowledge Base, n.d.) ...
  • Hossain, Md. Masum; Sourov, Sardar Sartaz (Daffodil International University, 2021-12-01)
    This report presents comparative study between medium brand color (Normal) reactive dyeing process and hot brand color (Turquoise) reactive dyeing process on cotton fabric. In this report we discuss about turquoise color ...
  • Hasan, Md. Fokhrul; Hossain, Mnowar (Daffodil International University, 2022-02-20)
    Dyeing errors are widespread in the textile business. During the Dyeing of knits, a variety of defects might develop. When evaluating a problem, it's crucial to try to figure out what's causing it. If the likely source ...
  • Shova, Most. Afsana Sultana; Sultana, Fowjia (Daffodil International University, 2022-01-20)
    Now, one of the most important factors in the home textile sector is garment defect, which has a negative impact on actual production. This study focuses on the various forms of defects that are commonly used in the ...
  • Rifat, Ishtiaq Mahamud; Hossain, Md Saikat; Khan, Md. Mahabubur Rahman; Nahar, Sabikun (Daffodil International University, 2022-03-22)
    This project report looks at the Analysis of Consumption and Costing of T-shirt which are the critical aspects of the clothing industry. As per being textile engineer we completed this project named analysis of consumption ...
  • Chanda, Sajib Kumar; Hasan, Rakibul; Sarker, Sagar (Daffodil International University, 2022-01-30)
    The main objective of this study is to investigate the overall effectiveness of different types of knit fabrics using different GSM and specific diameters. This lookup often does not focus on adjusting the specific ...
  • Basak, Animesh kumar; Hosssain, MD.Bapparaj; Rahman, MD.Sohanur; Golder, Amit (Daffodil International University, 2022-01-30)
    The Covid-19 pandemic affects the lives of millions of people, radically changing their habits in just a few days. In many countries, the control system set by the national government restricts the movement of the entire ...
  • Hossain, Md. Imran; Ahamed, Shakil; Hossen, Md. Rakib (Daffodil International University, 2022-03-28)
    Soil stabilization is any process that improves the physical properties of soil, such as increasing shear strength, bearing capacity, etc. Quantitatively the consistency can be expressed by the unconfined compressive ...

Search DSpace


Browse

My Account