Faculty of Engineering: Recent submissions

  • Different Types of Sewing Faults and Their Remedies 
    Islam, Md. Ashraful; Hosen, Md.Shohan; Mia, Md.Mamun (Daffodil International University, 2022-01-12)
    This project is ‘Study on sewing problem and their remedies’ of “KAC Fashion Wear Ltd.” Garment manufacturing is quite different from any other conventional manufacturing. It is not a continuous production method. Each ...
  • Industrial Engineering Technique of a Knit Garments Industry 
    Mondal, Md. Selim; Rana, Md. Masud; Hossain, Md. Jobaer (Daffodil International University, 2021-09-12)
    This thesis paper contains the overall procedure of SMV and operation bulletin of the garments industry. Have visited to knit valley Fashion Ltd. collecting the SMV and its related data. Completed in time study, production, ...
  • Flat Slab Thickness Effect on T-shaped Multistory Building as Per BNBC 2020 by Using ETABS 
    Muhumed, Khadar Mohamed (Daffodil International University, 2022-03-01)
    In this project, an 8-story T-shaped building model was analyzed with various slab thicknesses and column sizes in ETABS software (ETABS - Documentation - Computers and Structures, Inc. - Technical Knowledge Base, n.d.) ...
  • Comparative Study Between Medium Brand and Hot Brand Reactive Dye for Dying Cotton Fabric 
    Hossain, Md. Masum; Sourov, Sardar Sartaz (Daffodil International University, 2021-12-01)
    This report presents comparative study between medium brand color (Normal) reactive dyeing process and hot brand color (Turquoise) reactive dyeing process on cotton fabric. In this report we discuss about turquoise color ...
  • The Knit Fabric Dyeing Defects 
    Hasan, Md. Fokhrul; Hossain, Mnowar (Daffodil International University, 2022-02-20)
    Dyeing errors are widespread in the textile business. During the Dyeing of knits, a variety of defects might develop. When evaluating a problem, it's crucial to try to figure out what's causing it. If the likely source ...
  • Analysis of Different Between Before and After Defects in Home Textile Industry 
    Shova, Most. Afsana Sultana; Sultana, Fowjia (Daffodil International University, 2022-01-20)
    Now, one of the most important factors in the home textile sector is garment defect, which has a negative impact on actual production. This study focuses on the various forms of defects that are commonly used in the ...
  • Analysis of Consumption and Costing of T-shirt 
    Rifat, Ishtiaq Mahamud; Hossain, Md Saikat; Khan, Md. Mahabubur Rahman; Nahar, Sabikun (Daffodil International University, 2022-03-22)
    This project report looks at the Analysis of Consumption and Costing of T-shirt which are the critical aspects of the clothing industry. As per being textile engineer we completed this project named analysis of consumption ...
  • Various Type of Knit Fabrics Export in Bangladesh 
    Chanda, Sajib Kumar; Hasan, Rakibul; Sarker, Sagar (Daffodil International University, 2022-01-30)
    The main objective of this study is to investigate the overall effectiveness of different types of knit fabrics using different GSM and specific diameters. This lookup often does not focus on adjusting the specific ...
  • Impact of COVID-19 Water and Sanitation Sector 
    Basak, Animesh kumar; Hosssain, MD.Bapparaj; Rahman, MD.Sohanur; Golder, Amit (Daffodil International University, 2022-01-30)
    The Covid-19 pandemic affects the lives of millions of people, radically changing their habits in just a few days. In many countries, the control system set by the national government restricts the movement of the entire ...
  • Unconfined Compressive Strength Comparison Between Cement Stabilized and Lime Stabilized Soil 
    Hossain, Md. Imran; Ahamed, Shakil; Hossen, Md. Rakib (Daffodil International University, 2022-03-28)
    Soil stabilization is any process that improves the physical properties of soil, such as increasing shear strength, bearing capacity, etc. Quantitatively the consistency can be expressed by the unconfined compressive ...
  • Shear Wall Effects on Buildings in the Seismic Zone- 2 as Per BNBC 2020 (BNBC 2020) Utilizing ETABS 
    Mamun, Abdullah Al (Daffodil International University, 2022-02-28)
    The RCC structural building in this study is a rectangular form with a plan area of 768 m2 and a floor-to-floor height of 3 meters. The objective of this study is Shear wall effects on buildings in seismic zone-2 as per ...
  • Analysis of Multistory Buildings with Different Slab Thickness Using ETABS 
    Ahmed, Said Omar (Daffodil International University, 2022-03-30)
    In this study RCC structural building is L-shape which is 384 m2 in plan, with a Floor-to-Floor height of 3 meters. The major purpose of this study is to use ETABS to identify the smallest slab thickness that can safely ...
  • Plumbing Design of a Building 
    Hossain, Md. Momin; Akhter, Md. Tauhidur (Daffodil International University, 2022-03-30)
    Plumbing and sanitary system is very important for a building. Proper planning and designing of plumbing system is crucial as it takes care of the hygiene requirements of the occupants. A plumbing system will help make ...
  • Investigation of the Concrete-Filled Tube (CFT) and RCC Column Effect on Building in Seismic Zones-2 in ETABS 
    Islam, Md. Ariful (Daffodil International University, 2022-03-30)
    In today's environment, CFT columns are a common feature in modern multi-story construction all over the world. These RCC and CFT columns are added to the structure to allow it to be used for both commercial and residential ...
  • Analysis of Multistoried Building With and Without Floating Column Using ETABS 
    Dirie, Yahye Mohomud (Daffodil International University, 2022-02-20)
    In today's scenario, buildings with floating columns are a common feature in modern multistory construction in the world. These floating columns are presented to the building so that it can be used for both commercial and ...
  • An Investigation on Railway Ridership Response Under Different Scenarios 
    Shawon, Md. Injamul Haque; Rahman, Md. Mijanur; Rahman, Md. Mahabub (Daffodil International University, 2022-01-10)
    Railway is a mass transit system, which has high ridership potential. Compare to other competitive mode of transportation for long distance travel, train is inexpensive, takes smaller space and haul large number of ...
  • Observation of Green Space at Selected Cities in Bangladesh 
    Shovon, Tain Razzak; Sifat, M. Shahanshaazam; Rahman, Ashiqur (Daffodil International University, 2022-02-17)
    Enough green area is must needed for healthy and quality life of humans and animals. Not only physical health but also mental health has relation with Green Areas around. Various resources in past has examined relationships ...
  • Assessment on Buriganga River Water Quality at Selected Locations 
    Rashedujjaman, Md.; Feroz, Md. Rana; Hasan, Md. Mahmudul (Daffodil International University, 2022-02-22)
    This assessment has been performed to investigate the present water quality of Buriganga river at selected locations and to find possible solutions to prevent the degradation of the Buriganga river water quality. The ...
  • Dhaka Power Distribution Company Limited(DPDC) 
    Ahmmed, Md.Shobuj; Shamim, Md.Shaiful Islam (Daffodil International University, 2021-12-30)
    For knowing about the power sectors substations and distribution system this field study is more effective to us. In this report we described about the Dhaka Power Distribution Companies substations (Distribution ...
  • Analysis of Multi Storeyed Residential Building by Using ETABS Software 
    Das, Sajal Kanti; Ahmed, Md. Faisal; Salam, Abdus (Daffodil International University, 2022-01-07)
    The analysis of a multi-story residential building using ETABS software was explored in this work. And, according to BNBC 2017, we compared four parameters between storeys.The core methodology used here is a sequential ...

Search DSpace


Browse

My Account