Faculty of Engineering: Recent submissions

  • Comparative Analysis of Concrete with Admixture and Without Admixture 
    Mahmud, Md. Arman; Gazi, Md. Ibrahim; Masud, Md. Asif Al; Nerab, Mahebur Rahman (Daffodil International University, 2022-02-12)
    Compressive strength is an important topic for concrete. This paper discusses the use of admixture on concrete to increase compressive strength and also the economical effect of using admixture on concrete. In our project, ...
  • Design and Analysis 4*4 MIMO Antenna for UWB Application 
    Shanto, MD Shaman Rahman; Mahmud, Mohammad Fazuan Al (Daffodil International University, 2022-02-17)
    Ultra-wide band (UWB) communication technology has received much publicity over the years as the most efficient solution for short distance wireless data communication. This is due to the large unlicensed bandwidth ...
  • Thunderstorm Energy use Renewable Energy in Bangladesh 
    Khaled, H.M.; Bijoy, Bulbul Ahmed (Daffodil International University, 2022-04-30)
    Today, the question of energy is a global one. Many inventions and discoveries have been made, but the future of new ones is in jeopardy merely because energy sources are in short supply. However, our take on the subject ...
  • Optimal Size & Allocation of Renewable DG in Distribution Systems for Sustainability, Loss Minimization & Vast Voltage Profile Using GA 
    Islam, Md. Ahasanul; Sarker, Md. Zinnah (Daffodil International University, 2022-03-30)
    Real and reactive power losses occur in radial distribution systems, and voltage profiles are extremely low on buses furthest from slack buses, affecting all loads connected to that network. In this thesis, a strategy ...
  • Design and Hardware Implementation of Digital Car Parking System 
    Shah, Lokman; Durlov, Md. Siam Rahman (Daffodil International University, 2021-11-30)
    This project has indicated the idea of a digital car parking system. Everything in the advanced world is going programmed, we have assembled a method which can consequently detect the entry and exit of vehicles through ...
  • Heuristic Analysis of Solar-powered Electric Vehicle Charging Station 
    Islam, Md. Khairul; Bakshi, Prottoy (Daffodil International University, 2022-02-17)
    In this research paper, Solar power-based EV Station arrangement has been developed for Dhaka city, Bangladesh. ANN method is used of collect Solar Irradiance. Plant area allocation data set has been prepared with the ...
  • Design a Wireless Controlled Wheel Chair for Paralyzed People with Joystick 
    Emon, Md. Saydur Rahman; Islam, Md. Takmilul (Daffodil International University, 2021-11-30)
    Wireless Control Wheelchair (WCWCPP) for paraplegic people with joystick, electric wheelchair (PW) with computers, sensors and assistive technology. over the past decade Little has been attempted to systematically review ...
  • Design and Analysis of a Bow Tie Antenna for 1GHz Application 
    Ayon, Nafis Anjum; Rahman, Md. Tareq (Daffodil International University, 2021-12-30)
    In order to meet rising communications challenges in terms of size, bandwidth, and gain, newer microwave and millimeter-wave systems are in increased demand. As a result, antennas are frequently used to suit the needs ...
  • Study on Circuit Breaking Mechanism in Modern HVDC Power System 
    Hossain, Md. Nayeem; Chowdhury, Md. Kefayet Ullah (Daffodil International University, 2022-03-30)
    The innovation of high-voltage direct current (HVDC) has sparked a great deal of interest over the last few decades, attributed to the fast development of possible voltage levels, transmission capabilities and transmission ...
  • Design and Analysis of T-shape Microstrip Antenna for Wlan and C Band Application 
    Fatema, Maul Jannat; Sultana, Sharmin (Daffodil International University, 2022-04-30)
    In this study, a new modified T shape simple Microstrip patch antenna (MPA) for Wi-Fi packages is proposed and studied. The suggested antenna runs between 4 and 8 GHz with a go back loss of less than -10 dB, practically ...
  • An Overview of Vanadium Redox Inflow Battery for Marketable Operations With Renewable Energy 
    Goswami, Anirudda; Rafe, MD. Sadiqul Islam (Daffodil International University, 2022-03-30)
    The vanadium Redox Flow Battery (VRFB) is a promising electrochemical energy storehousedevice that retains electrical energy by conforming the oxidation figures of anolyte and catholytevia a redox response. It's suitable ...
  • Assessing How Yarn Count Affecting Various Properties of Knit Fabrics 
    Hassan, Md. Morshedul; Nishat, Md. Nabiuzzaman (Daffodil International University, 2022-03-30)
    Yarn is the raw material of fabric production and yarn count is the core property of yarn quality which significantly affects the fabric property as well. In this study we have discuss how the finished GSM , stitch length ...
  • Study of Present Scenario of Tidal Power Energy and Generation in Bangladesh 
    Bashar, Md. Abul; Haque, Rukaiya (Daffodil International University, 2022-03-30)
    Tides are caused by the catching forces between the divine bodies of the Sun, Moon and Earth, which cause the sea waters to rise and fall. As technology advances, the utilization of electrical and electronic gadgets ...
  • Study on Denim Productivity of Slasher Dying & Weaving 
    Hossain, Mozammel; Islam, Tanjila (Daffodil International University, 2022-01-30)
    The project is on “Productivity of Denim Slasher Dyeing & Weaving”. To know about Denim productivity, we have to go NZ Denim Limited sister concern of NZ Tex Group. We need to start working on the project with effective ...
  • Effect of Yarn Count on Fabric Shade 
    Akash, Sani Rahman; Hossen, Monir (Daffodil International University, 2022-02-20)
    This study has been sorted on effect of denim yarn dyeing with vat dye in different ratio of Hydrose and Caustic Soda. In this thesis experiment we use two types of yarn Cotton yarn and Tencel yarn. Cotton is the most ...
  • Study on the Effect of Bio-polishing on Knit Fabric Properties 
    Abir, Enamul Hasan; Khan, Md. Abir (Daffodil International University, 2022-03-30)
    The main purpose of this paper is to investigate the quality improvement based on before and after bio-polishing process on different types of fabrics. The research was done on s/jersey, 1x1 rib, single lacost and terry ...
  • Comparative Study Between Exhaust Method and Cold-pad Batch (CPB) Method for Dyeing 100% Cotton Fabric 
    Rounoque, K. M.; Sarkar, Amit Kumar; Karim, Reduanul (Daffodil International University, 2022-02-20)
    Dyeing is the operation of colorings or colors on cloth accouterments similar as filaments, yarns, and fabrics with the thing of achieving color with asked colorfastness. Dyeing is typically done in a special result ...
  • Studies on the Effect of Dyeing Polyester Fabric With Disperse Dye 
    Saha, Sourov Kumar; Huq, A.K.M. Mumeenul (Daffodil International University, 2022-01-30)
    The pH is a measure of how acidic/basic water is. The range of values is 0 to 14. 7 indicates neutral, below 7 indicates acidic, and over 7 indicates alkaline. Every chemical reaction works best at a specific pH, or ...
  • Comparative Study on Different Types of Sewing Faults for Different Factories 
    Islam, Md. Rakibul; Akhter, Forida; Karim, Rezaul; Ahammed, Md. Al Shafe (Daffodil International University, 2022-03-12)
    Now a days Garments defect is one of the most important factors of the apparel manufacturing industry because it creates a negative effect on actual productivity. This paper aims with Different types of Defects which are ...
  • Study on Reports of GSM, Inspection, Shade and Shrinkage % for Three Buyers 
    Any, Afroza Akter; Shakil, Rasel Ahmed (Daffodil International University, 2022-03-30)
    In the garments industry, the fabric inspection procedure is one of the most crucial processes. Fabric flaws are a key criterion for fabric rejection. This project has provided us with a wealth of experience. We have ...

Search DSpace


Browse

My Account