Faculty of Engineering: Recent submissions

  • HR Practices of Damex Digital 
    Badhon, Shakhawat Ullah (Daffodil International University, 2021-07-07)
    Damex Digital is a Canada-based Digital Marketing Agency providing top-notch marketing support to local small and medium businesses. They specialize in website design & development, classified ads, and other sort of ...
  • Smart Home Automation 
    Rasid, Md.Harunur; Ahammed, Tanvir (Daffodil International University, 2019-11)
    This paper represents the advancement of both Home and Industry appliance automatic control by smartphone or remote systems. The main destination of our project is the security system of the home. It has a fire detector ...
  • Improvement of the Efficiency of Parabolic Trough Collector 
    Fuad, Md. Assrafujzaman (Daffodil International University, 2019-12)
    In the present era the environment conscious country and people are interested to use renewable energy rather than using fossil fuel. Sun is the best source of renewable energy. We can collect solar energy almost everywhere ...
  • Prospects of Renewable Energy in Bangladesh 
    Nisa, Effat (Daffodil International University, 2019-12)
    Electric energy security is essential, yet the high cost and limited sources of fossil fuels and need to reduce greenhouse gasses emission, have made renewable resources attractive in world energy based economics. The ...
  • Maintenance System of Santahar 50 MW Peaking Power Plant 
    Sikder, Moslamin; Hasan, Mahmudul (Daffodil International University, 2019-05)
    The internship report titled “STUDY ON MAINTENANCE SYSTEM OF SANTAHAR 50 MW PEAKING POWER PLANT”. This is basically diesel engine base power plant. This type of power plant fuel source is diesel and furnishes oil. Diesel ...
  • Determination of Electricity Distribution Cost of Narayanganj PBS-1 
    Tonmoy, Md. Saroat Sabin; Hosain, Monir (Daffodil International University, 2019-07)
    This thesis is on “Study on Determination of Electricity Distribution cost of Narayanganj PBS-1”. Electricity distributions convey information on internal system operation to the actors involved. Electricity pricing is, ...
  • An Approach to Find out the Alternative Solution at an Urban Intersection 
    Sifat, Muhtadiur Rahman; Rouf, Md. Abdur; Hossain, Shakhawat; Ananna, Tanjum Ahmed; Antora, Afsana Akter (Daffodil International University, 2021-10-17)
    Efficiency delivery of city needed for the victory of a city whose transportation system is an important component. For a sustainable economic development efficient transportation is a vital thing. In Bangladesh traffic ...
  • Beam and Column Design of A Six Storied Residential Building 
    Suhag, Saidul Islam; Bin-Alam, Erfanur-; Halder, Sree.Shuvo Kumer; Anik, Qazi; Roy, Polash Chandrow (Daffodil International University, 2021-10-17)
    In this study, we have designed six storied residential buildings considering Beam and column design. This building is designed based on gravity load and lateral loads effect. The weight of a building's floors, ceilings ...
  • Evaluation of Escalator Foot over Bridges Located in a Metropolitan Area 
    Sarkar, Hironmoy; Molla, Md. Sagar; Haldar, Nitai Kumar; Rahim, Mohammed Azizur; Rahman, Md. Shahinur (Daffodil International University, 2021-03-30)
    Foot over bridges are accompanied with escalators now in Dhaka city. Several projects have been implemented at present and various such projects will be in the pipeline of the implementation. Our study tries to identify ...
  • Design of a Six Storied Residential Building and Column Comparison in Between Seismic Zone -1 and Zone -3 in Bangladesh 
    Akter, Nipa; Hossain, Md. Akram; Hossain, Jaker; Miah, Salman; Naiyem, F.M.A (Daffodil International University, 2021-07-30)
    In this study, we designed a six storied residential building considering later force. And we made column comparison between two seismic zones in Bangladesh. The basic methodology adopted here is the sequential presentation ...
  • Design of a Six Storied Residential Building 
    Hossain, Md. Nafiz; Khandoker, Md. Ariful Islam; Al Amin, Md.; Rezion, Tanim; Ahmed, Md. Rony (Daffodil International University, 2021-09-07)
    In this study, we designed a six stories Residential building Considering all Forces. The objective of this study to design and detailing (column, beam, slab). The basic methodology adopted here is the sequential ...
  • Effect of Lateral Loads on RCC Residential Building by Etabs According to BNBC 2017 
    Swan, Md. Ashraful Hasan; Mahmud, Imroz; Islam, Md. Sahidul; Hossain, Tanzir (Daffodil International University, 2021-12-30)
    The lateral load effect on R.C.C. buildings has gotten a lot of attention for establishing specialized characteristics according to the BNBC 2017. ETABS is used to assess steel constructions, R.C.C Low and High Rise ...
  • Quality Issues in Knit Fabric 
    Mou, Taufika Akter; Bhuiyan, Nasim Kabir (Daffodil International University, 2021-06-02)
    To finish our project job, we first collected some defected fabric pictures from Liz Fashion Industry Limited, Magpie Knit Composite. In knitting floor, dyeing area, finishing floor, and inspection section. Then we divide ...
  • Non-Productive Time (NPT) in Knit Garment 
    Hasan, Abdullah (Daffodil International University, 2021-11-24)
    This thesis report present Study on Non-Productive Time (NPT) in Knit Garment Production. Has worked on this report because of non productive time (NPT) is the main reason for low production . It has been observed 8 hours ...
  • Development Sample for Various Buyers 
    Biswas, Dip; Singha, Redoy (Daffodil International University, 2021-11-02)
    The project is on Comparative study on development sample for various buyer. We know the large and most important section in garments industry is sample development. We made a study on 3 buyers development sample to know ...
  • Analysis of Sewing Faults in a Knit Garment Industry 
    Ahmed, Md Parvez; Dey, Shajib (Daffodil International University, 2021-09-17)
    Sewing methodology is one of the most important stages in the creation of garments. During the assembly process in the sewing system, a few faults or deformities may occur, resulting in a low quality of the clothing item. ...
  • Measurements Found in Sample and Final Inspection 
    Siraji, Md. Masud Ibne (Daffodil International University, 2021-11-14)
    This report presents the Comparative Study on Measurements found in Sample and Final Inspection. Has worked on this topic because through measurement can prepare comfortable and fit garments. It has been observed that ...
  • Study on Knit Garments Merchandising 
    Shakil, Headauat Ullah; Sifath, Shahiduzzaman (Daffodil International University, 2021-09-17)
    The Garments, Apparel, and Knitwear Industry contributes more than 84 percent of Bangladesh's export revenues. The goal of this thesis is to give a comprehensive review of garment merchandising, as well as a resource and ...
  • Construction and Design of Automatic Ruti Maker 
    Al-amin, A.K.M.; Bala, Comus (Daffodil International University, 2019-12)
    One of the most innovative products for today’s world is Automatic Ruti Maker. The mechanical part of this machine is very simple to look at and the application of software is also very easy to understand to the users ...
  • Effects of Drying on Knit Fabric Properties 
    Apon, Md. Redwanul Haque; Das, Kowshik (Daffodil International University, 2019)
    This study pretend to assess the effects of drying on knit fabric properties. Mainly Dryer machine works to eliminate the extra water remains on fabric after de-watering. By using dryer machine many properties of fabric ...

Search DSpace


Browse

My Account