Faculty of Engineering: Recent submissions

  • Hossain, Md. Nafiz; Khandoker, Md. Ariful Islam; Al Amin, Md.; Rezion, Tanim; Ahmed, Md. Rony (Daffodil International University, 2021-09-07)
    In this study, we designed a six stories Residential building Considering all Forces. The objective of this study to design and detailing (column, beam, slab). The basic methodology adopted here is the sequential ...
  • Swan, Md. Ashraful Hasan; Mahmud, Imroz; Islam, Md. Sahidul; Hossain, Tanzir (Daffodil International University, 2021-12-30)
    The lateral load effect on R.C.C. buildings has gotten a lot of attention for establishing specialized characteristics according to the BNBC 2017. ETABS is used to assess steel constructions, R.C.C Low and High Rise ...
  • Mou, Taufika Akter; Bhuiyan, Nasim Kabir (Daffodil International University, 2021-06-02)
    To finish our project job, we first collected some defected fabric pictures from Liz Fashion Industry Limited, Magpie Knit Composite. In knitting floor, dyeing area, finishing floor, and inspection section. Then we divide ...
  • Hasan, Abdullah (Daffodil International University, 2021-11-24)
    This thesis report present Study on Non-Productive Time (NPT) in Knit Garment Production. Has worked on this report because of non productive time (NPT) is the main reason for low production . It has been observed 8 hours ...
  • Biswas, Dip; Singha, Redoy (Daffodil International University, 2021-11-02)
    The project is on Comparative study on development sample for various buyer. We know the large and most important section in garments industry is sample development. We made a study on 3 buyers development sample to know ...
  • Ahmed, Md Parvez; Dey, Shajib (Daffodil International University, 2021-09-17)
    Sewing methodology is one of the most important stages in the creation of garments. During the assembly process in the sewing system, a few faults or deformities may occur, resulting in a low quality of the clothing item. ...
  • Siraji, Md. Masud Ibne (Daffodil International University, 2021-11-14)
    This report presents the Comparative Study on Measurements found in Sample and Final Inspection. Has worked on this topic because through measurement can prepare comfortable and fit garments. It has been observed that ...
  • Shakil, Headauat Ullah; Sifath, Shahiduzzaman (Daffodil International University, 2021-09-17)
    The Garments, Apparel, and Knitwear Industry contributes more than 84 percent of Bangladesh's export revenues. The goal of this thesis is to give a comprehensive review of garment merchandising, as well as a resource and ...
  • Al-amin, A.K.M.; Bala, Comus (Daffodil International University, 2019-12)
    One of the most innovative products for today’s world is Automatic Ruti Maker. The mechanical part of this machine is very simple to look at and the application of software is also very easy to understand to the users ...
  • Apon, Md. Redwanul Haque; Das, Kowshik (Daffodil International University, 2019)
    This study pretend to assess the effects of drying on knit fabric properties. Mainly Dryer machine works to eliminate the extra water remains on fabric after de-watering. By using dryer machine many properties of fabric ...
  • Chakma, Sabit; Roy, Koushik Chandra (Daffodil International University, 2019-12)
    This thesis paper contains the overall procedure of Industrial Engineering (IE) in the garments industry. We have visited on Robintex Group at Vulta, Rupganj, Narayanganj to research the operation breakdown, standard ...
  • Arifuzzaman, Arifuzzaman (Daffodil International University, 2021-10-16)
    Remote advancements have as of late filled in prominence all throughout the planet. In the system of remote innovation, 5G innovation has arisen as an especially requesting and alluring subject. This article sums up the ...
  • Osman, Shamim (Daffodil International University, 2021-08-02)
    In this research solar cell efficiency has been increased by swapping several type of cell materials with different thickness and materials behaviour has been observed by analyzing consumption of photon by the semiconducting ...
  • Rabbi, MD. Fozley; Mahmud, Mahathir; Islam, Sajibul (Daffodil International University, 2020-10-24)
    Mode choice or modal split is the fourth step of transportation planning. The step discuss with the mode choice behavior of road user for a particular set of origin and destination node specified to particular route. ...
  • Islam, Md. Zahidul; Sarker, Ridoy Chandra; Islam, Md. Rahatul; Hassan, Md. Maksudul (Daffodil International University, 2020-09-30)
    This report has been written as “A measurement on traffic control volume of public transport systems of Khulna city”. This paper attempts to gain insights into the traffic control volume and its effect on the public ...
  • Khan, Md. Tanjil Mahmud; Tabrez, Md. Shamsher; Uddin, Salah; Shahzahan- Seraj, Md.; Hosen, Meherab (Daffodil International University, 2021-07-13)
    This thesis work attempts to develop a viable model for predicting the deflection of flexible pavements based on experimental data of flexible pavements of various ages utilizing International Roughness Index (IRI) values. ...
  • Sarkar, Rathindra Nath; Islam, Raisul; Shuvo, Sumit Shom; Siam, Md. Rakibul Islam; Islam, Md. Azharul (Daffodil International University, 2021-07-12)
    Walking is the most proficient and viable method of transportation for short excursions without cost. The Walking pace of walkers is of prime significance in an investigation of capacity, plan furthermore, arrangement ...
  • Tasin, Md. Tasnimul Hasan; Islam, Raihanul; Riad, Nur Mohammad; Mohammad, Nur (Daffodil International University, 2021)
    The report has been written as “Slab Design of a Six Storied Residential Building”. The construction of a six storied building can be divided into several major steps. These stages involve the execution of all works in ...
  • Shourov, Nazibullah Hossain; Said, Mohamed Abdirisak; Hasan, Md. Kabirul; Rahman, Tarakur; Mohamud, Yasir Hassan (Daffodil International University, 2021-06)
    The study has been conducted in the Department of Civil Engineering of Daffodil International University, Bangladesh with the objective to prepare a project and thesis with a view to partial fulfillment of the requirements ...
  • Hassan, Md Jahid (Daffodil International University, 2021-12)
    In the present time, the solar energy is extremely useful for the existence of humankind. Energy is used in a lot of different ways specially in houses, for appliances, vehicles ,industries etc. The name of this project ...

Search DSpace


Browse

My Account