Faculty of Engineering: Recent submissions

  • Study on Production Process of Kids Wear 
    Sikder, Md Mahbub; Mamun, Hasan Al (Daffodil International University, 2019-12)
    We worked on the report of Original Marine. This report presents the final table inspection and final inspection report while producing different types of Kids wear. Different clothing defects are also presented in ...
  • Study on Quality inspection in a Hoodie jacket manufacturing industry 
    Islam, Md. Reajul; Islam, Sajibul; Pranto, Rayhan Feroz (Daffodil International University, 2019-12)
    This report illustrate the manufacturing process of a Hoodie Jacket. To make a complete Hoodie Jacket all the process required and the activity of different section are acquainted this project. To make a garment different ...
  • Study of Bio-Chemical Effluent Treatment Plant (ETP) in Ananta Denim Technology Ltd. 
    Eti, Umme Salma; Moktadir, Md. Golam (Daffodil International University, 2019-09)
    ETP or Effluent Treatment Plant is one of the most crucial parts of wet process. As Global warming is increasing at an alarming rate and we may lack water to use or consume, ETP is a must for every factory with ...
  • Effects of Compacting on Knit Fabric Properties 
    Rahman, Md. Mahfuzur; Rifat, Anwar Shadat; Ali, Md. Hazrat (Daffodil International University, 2019-12)
    This study has been sorted on effects of compacting on different knitted fabric properties. For complete this study we have used sample fabric of compactor machine before compactor and after compactor. We took multiple ...
  • Study on the quality reports of cutting & sewing section of a knit composite factory 
    Hasan, Md. Rokibul; Alam, Mohammad Iftekharul (Daffodil International University, 2019-12)
    We have successfully done our report on “Study on quality reports of cutting & sewing section of a knit composite factory” We have visited all the sections (Knitting, dyeing, dye finishing, cutting, printing, sewing, ...
  • Analysis of cut panel inspection of a knit composite factory 
    Hasan, Md. Jahid; Rahman, Md. Ashiqur (Daffodil International University, 2019-12)
    Cutting is that the most want arranges parturient escalated instant clothes undertakings. Quality Faults happening amid this procedure antagonistically influence the item quality and item effectiveness and moreover ...
  • Investigation on Changes of Physical Properties of Various Types of Denim Fabric by Different Types of Wash 
    Jaman, Md. Asif; Hasan, Mahade (Daffodil International University, 2019-12)
    Garments washing are very useful for modifying garments, especially which is made of denim fabric. By doing wash we can change the appearance, outlook, and comfortability. Enzyme washing of denim garments helps in bio- ...
  • Study of Power Generation & Distribution of an Industrial Load (Based on South East Textile Pvt. Ltd) 
    Hosain, Jubaer; Islam, Md. Shafiqul; Mia, Sazahan (Daffodil International University, 2018-12-01)
    This internship is on “Power Generation & Distribution of an Industrial Load”. The textile companies are in the rise within the private sectors of Bangladesh. In order to increase power capacity & to reduce the initial ...
  • Application Of Industrial Engineering In Garments Sewing Floor 
    Hasan, Md. Zahidul; Islam, Md. Momtazul (Daffodil International University, 2018-12-01)
    This project is on “Application of Industrial Engineering In Garments Sewing Floor”. Traditionally operated garment industries are facing problems like low productivity, longer production lead time, high rework and rejection, ...
  • Study On Protection and Control System of Electrical Substation 
    Kamal, Md. Mostafa (Daffodil International University, 2019-07-01)
    An electrical substation is a helper station of a power age, transmission, and dispersal system where voltage is changed from high to low or the switch using transformers. At first, the substation was related to only one ...
  • Factors that affecting Air Permeability of 100% cotton single jersey fabric. 
    Hosen, Md. Arif; Mahamud Shanto, Afsan (2019-04-06)
    The goal of the study was to determine the effects of WPI, CPI, loop length, GSM, thickness of knitted fabrics on comfort parameters including air permeability. For this purpose, comfort properties of 100% cotton single ...
  • Study of Physical Changes in Denim Fabric After Enyme & Bleach Washing Processes 
    Nazim, Mir Nazmul Islam; Talukder, Panna (Daffodil International University, 2019-12-17)
    Raw denim fabric obtained after finishing is mostly impossible to wear before wash because of the rigidity and stiffness of finished denim. Finished denim is also very dull looking before wash. So, it is usually a must ...
  • Investigation on the comments of buyers on different types of sample 
    Mollah, Md. Shaon; Chandra, Showrab (Daffodil International University, 2019-12)
    Our Project (Thesis) is on “Investigation on the comments of buyers on different types of sample.” In RMG sector the role of the sample section is very important. Whatever the efficiency or profitability of the manufacturing ...
  • A Comparative Study on Lab Tests of Various Types of Knit Garments 
    Rana, Md.Sohel; Nayem, Md. (Daffodil International University, 2019-12)
    This paper clearly explains different quality test report. This project based on the different types of testing of color fastness, pilling, shrinkage, dimensional stability, spirality and quality variation for different ...
  • Effects of Washing on Properties of Various Types of Denim Garments 
    Tuhin, Sk. Abir Taher; Ray, Madhusudan (Daffodil International University, 2019-12-06)
    This project is on “Effects of Washing on Properties of Various Types of Denim Garments.” Washing is a very important procedure in garments manufacturing. Every buyer wants to buy good quality product. As a result buyers ...
  • Comparison of Ongoing Roadway Maintenance Projects by Roads and Highways Department 
    Bappi, P.M. Shishir Ahmed (Daffodil International University, 2019-12)
    Road networks in Bangladesh are spending much faster than relative budgets and institutional capabilities. Generally, projects review various aspects of road maintenance. In the end, kilometers are studied for different ...
  • Study on Quality Control in Sports Cap Manufacturing 
    Rifat, S.M. Golam Kibria; Akter, Md. Shoive (Daffodil International University, 2019-05-27)
    his project is „Study on Quality Control in Sports Cap Manufacturing’of “Unimas Sportswear Limited” Garment manufacturing is quite different from any other conventional manufacturing. It is not a continuous production ...
  • Study on dyeing and finishing faults of knitted and woven fabrics 
    Rahman, Ashikur; Sisir, Md. Sajjadul Amin (Daffodil International University, 2019-05-05)
    At first we inspect on the industry and found some defected fabric from the dyeing section and finishing section of different industries to fulfill our work project. Then we separated our collected information into two ...
  • Study on Finished Fabric & Knit Garments Inspection Report 
    Das, Akash Chandra; Islam, Zahidul; Hosen, Mohammad Rayhan (Daffodil International University, 2019-04-05)
    This report presents the finishing process report in different types of knit garments. During manufacturing various defects are occurring in different types of knit fabric & garments. Finishing process is depending on ...
  • Analysis Technical Relationship within count, Stitch length and Grey GSM of (1×1) Rib fabric and (1×1) Interlock Fabric 
    Atiq, Atiqullah Mahmod; Ullah, MD. Fiaz; Rahman, Mariam (Daffodil International University, 2019-04-12)
    In this project mainly focus on the Rib and Interlock fabric. We notice some interesting relationship each other facts like yarn count, stitch length and grey GSM of knit fabric mainly (1×1) Rib and (1×1) interlock fabric. ...

Search DSpace


Browse

My Account