Faculty of Engineering: Recent submissions

  • A Representation of Dynamic Traffic Volume Analysis for a Corridor of Mirpur Road adjacent to Daffodil International University 
    Morshed, Neaj; Mohammad, Taj; Bostame, Md. Bayjid (Daffodil International University, 2019-10-12)
    Traffic congestion is a critical concern in most cities. Inefficient traffic control wastes time and fuel and causes harmful carbon emissions, road accidents, and many economic problems. This thesis focuses on a cooperative ...
  • Study on Diesel Power Plant of Liz Fashion Industry Limited 
    Jafroul Hasan, Md. (Daffodil International University, 2019-07-16)
    This report explains about the power plant which is use the diesel engine as the prime mover. This power plant need to output electric energy. Generally, it is used for heavy duty vehicles. It can also be used for power ...
  • Solar PV Grid Connected Power Plant Analytical Design by RET Screen 
    Kaisar, Mobasshir; Shadman Al Sakib, Md. (Daffodil International University, 2020-01-10)
    The power division in Bangladesh is profoundly subject to non-renewable energy sources, as petroleum gas and coal are the commanding hotspots for control age in the nation. About 62.9% of Bangladeshi produced power ...
  • Design and Analysis of a Wideband Microstrip Antenna for High Speed WLAN 
    Hossain, Farhad; Uddin, Md. Raihan (Daffodil International University, 2019-11-25)
    The wired neighborhood is turning out to be remote step by step. The assignment of recurrence range for this Wireless LAN is diverse in various nations. This shows a horde of energizing chances and difficulties for plan ...
  • An Overview of Lightning Protection System and Its Calculation 
    Ridoy Ahmed; Al-Amin (Daffodil International University, 2019-12-06)
    A rainstorm is fundamentally a tempest, described by lightning and thunder, lightning is a normally happening electrostatic release during which two electrically charged locales in the air or ground incidentally even out ...
  • Prospect of Tidal Power Generation at Dublar-char of Bangladesh Through Tidal Barrage Using Low Head Water Turbine 
    Tofayel Ahmed, Md.; Hasan, Mohammad Mahedy (Daffodil International University, 2020-01-10)
    In this thesis the hydro potential suitable for electrical power generation available in coastal area of Bangladesh is Investigated and developed a model for total possible electrical power generation using tidal barrage ...
  • Effect of Fabric Structure on Dimensional Stability of Garments 
    Hasan, Md Iqbal; Shakil Ahmed; Gowrob Ahmed (Daffodil International University, 2020)
    The main objectives of this study to research about the Effect of Fabric Structure on dimensional Stability of Garments .I have completed my internship at fakir knitwear tld. Fakir industry is a well known garments ...
  • Analysis of Consumption and Costing of Trims and Accessories for Woven and Knitted Garments 
    Raihan, Ashique; Kabir, G M Ahasan; Islam, Moinul (Daffodil International University, 2020)
    Trims and accessories are the most valuable component for textile garments section. Trimming and accessories both are most important for make the garments. We used many types of trims and accessories for making a shirt, ...
  • Comparative Study on K/S Values and Wash Fastness Using Bi-Functional and Mono-Functional Reactive Dyeing on 100% Cotton Knitted Fabric 
    Haq, Md. Anamul; Shaon, Md. Sazzad Hosain (Daffodil International University, 2020)
    In this study, a mixed bi-functional reactive dye and Mono-functional reactive dye was applied to the cotton fabrics. Their K/S values and wash fastness properties were compared. In the knitwear industry, the dyeing of ...
  • Overview of a 132/33 KV Substation 
    Hossain, MD. Shahed; Mahfuzul Hasan, MD.; Rahman, Habibur (Daffodil International University, 2020-01-01)
    A substation is a part of an electrical generation, transmission, and distribution system. Substations transform voltage from high to low, or the reverse, or perform any of several other important functions. Between the ...
  • IOT Based Automatic Control Circuit Breaker for Transmission Line 
    Hossain, Rakib; Sarkar, Sabuj Kumer (Daffodil International University, 2020-01-10)
    Every project has fixed goal the main goal of this project is to detects the faults when Over voltage and short circuit occurs the circuit will automatically Trip. When we apply 220 volts at both step-down transformer ...
  • Study on Industrial Automaton at Walton Hi-tech Industries Ltd. 
    Mosharaf, Md. Parvez (Daffodil International University, 2020-01-10)
    This task gives the idea of using Programmable Logic controller PLC in Industrial Automation using PLC is a top aspect a virtual pc used for automation of everyday business electro- mechanical methods which include ...
  • Design and Implementation of BTS Room in Cabinet Controller 
    Biswas, Razu; Ariful Islam (Daffodil International University, 2019-12-10)
    Our project name is a design and implementation of monitoring and survellence of BTS room in cellular network. The main purpose in our project is high protection of BTS room. Various kind of expensive electrical and ...
  • Investigation on Color Fastness Properties of Various Printing on 100% Cotton T-Shirt 
    A. Kayum, Md. (Daffodil International University, 2020)
    This project is ‘‘Investigation on Color Fastness Properties of Various Printing on 100% Cotton T-Shirt/Polo Shirt” Garment Printing is quite different from any other conventional manufacturing. It is not a continuous ...
  • Effect of Burn out Print on Physical and Mechanical Properties of Knit Fabrics 
    howlader, Md Hachib; Ahmed, Mohammad Sabbir (Daffodil International University, 2020)
    This paper is an experimental investigation of the effect of Burn out print on physical and mechanical properties of knit fabrics. In this work two different colored fabrics with same fabric structure and composition were ...
  • Overview of Sgwicus (BD) Ltd and Eectrical Distribution 
    Ahmed, Rasel (Daffodil International University, 2019-12-10)
    This chapter is going to regarding an industrial power system and Installation. In here I will show the power generating system and also will be explained how to work in various components and devices with a good ...
  • Study on Different Types of Sewing Faults and Their Remedies 
    Rahaman, Masodur; Hossain, Navid; Hossain, Md. Alamin (Daffodil International University, 2020)
    This project is ‘Study on Different Types of Sewing Faults and Their Remedies’ of Crystal Composite Knit Ltd” The production of garments is very distinct from any other traditional production. It is not a method of massive ...
  • Consumer Buying Behavior 
    Kamal, Md. Mostafa; Emon, Md. Mahedi Hasan; Rahman, Md. Atkur (Daffodil International University, 2020)
    This thesis report is prepared based on the behavior which is influence the consumer buying behavior. We are found out that the relation between the product quality & price is the major influence to make the purchase ...
  • Micro Power-generation by Flywheel Multiplication of Off Grid System 
    Mondol, Nitish Ranjan (Daffodil International University, 2020-01-09)
    Micro power generation by flywheel multiplication, which is a kind of Flywheel Energy Storage Systems (FEGS) provide a means for improving the efficiency of electrical systems when there are imbalances between supply and ...
  • Study on Various Knit Fabric and Machine Efficiency 
    Paul, Hridhya; Angun, Zareen; Akhtar, Lima (Daffodil International University, 2019-11-20)
    At first, we collect some of knitted fabric samples along with required data which are needed to commence our project work with effective analysis. We also separate the fabrics according to their class so that we can ...

Search DSpace


Browse

My Account