DESIGN AND IMPLEMENTATION OF C OLOR DETECTING SYSTEM

Ahmed, Titas

DSpace Home
→
Faculty of Engineering
→
DEPARTMENT OF ELECTRICAL & ELECTRONIC ENGINEERING
→
Project Report
→
View Item

dc.contributor.author	Ahmed, Titas
dc.date.accessioned	2019-06-09T05:53:23Z
dc.date.available	2019-06-09T05:53:23Z
dc.date.issued	2018-12-01
dc.identifier.uri	http://hdl.handle.net/123456789/1939
dc.description	The Color sensor module based on TCS3200 that is a programmable colorlight-tofrequency converter, it could filter RGB data source from light and convert it to a square wave(50% duty cycle) with frequency straight proportional to light intensity (irradiance).The fullscale output frequency canbe scaled by one of three scheduled values via two control input pins(SO, S1Selectable Options 2%, 20%, 100% frequency),and pin S2, S3 control the filter of RGB.	en_US
dc.description.abstract	In this project we are going to interface TCS3200 color sensor with Arduino UNO. TCS3200 is a color sensor which can detect any number of colors with right programming. TCS3200 contains RGB (Blue,Green, Red) arrays. As shown this fi gure on microscopic level one can see the square boxes inside the eye on sensor. These square boxes are arrays of RGB matrix. Each of these boxes contain three sensors, one is for sensing BLUE light intensity, one is for sensing GREEN light intensity and the last in for sensing RED light intensity. Each of sensor arrays in these arrays selected separately depending on requirement. The particular color can be feature to sense by module and leave the colors. It contains filters for that selected purpose. There is forth mode that is no filter mode with no filter mode the sensor detects white light.	en_US
dc.language.iso	en_US	en_US
dc.publisher	Daffodil International University	en_US
dc.relation.ispartofseries	;P12776
dc.subject	OLOR, DETECTING, SYSTEM, C	en_US
dc.title	DESIGN AND IMPLEMENTATION OF C OLOR DETECTING SYSTEM	en_US
dc.type	Other	en_US