AUTOMATIC RAILWAY CROSSING

Islam, Md Hafijul; Chowdhury, Md. Mahabubur Rahman

DSpace Home
→
Faculty of Engineering
→
DEPARTMENT OF ELECTRICAL & ELECTRONIC ENGINEERING
→
Project Report
→
View Item

dc.contributor.author	Islam, Md Hafijul
dc.contributor.author	Chowdhury, Md. Mahabubur Rahman
dc.date.accessioned	2019-06-09T09:46:23Z
dc.date.available	2019-06-09T09:46:23Z
dc.date.issued	2018-12-01
dc.identifier.uri	http://hdl.handle.net/123456789/1960
dc.description	The project is a digital railway crossing system made with an Arduino pro mini and IR sensor and a few other components. The main aim of the project is to detect the presence of a train on the rail line and control the crossbar. The working of the project starts with the IR sensor that senses the coming up train on the rail line near the rail crossing and uses that sensing signal the Arduino produce a voltage signal which controls the crossbar for open and close.	en_US
dc.description.abstract	In this project the railway signaling includes the gate control is done using microcontroller. The automatic opening and closing of the gate and also the signaling which depending on the gate position that will be controlled by the microcontroller. The railway gate is to be controlled so that the road traffic is to be predicted .The railway gate is to be closed when a train is passing by the way. The opening and closing of the gate is to be done using stepper motors and this stepper motor is controlled by micro controller. The signaling of the train is also controlled depending upon the gate position. Only when gate is closed the green signal is otherwise red signal.	en_US
dc.language.iso	en_US	en_US
dc.publisher	Daffodil International University	en_US
dc.relation.ispartofseries	;P12811
dc.subject	AUTOMATIC, RAILWAY, CROSSING	en_US
dc.title	AUTOMATIC RAILWAY CROSSING	en_US
dc.type	Other	en_US