DSpace Repository

Browsing DEPARTMENT OF TEXTILE ENGINEERING by Title

Browsing DEPARTMENT OF TEXTILE ENGINEERING by Title

Sort by: Order: Results:

  • Study on Quality Issues in Cutting Section 
    Sorker, Anik (Daffodil International University, 2023-10-30)
    My Thesis Topic is Study On "Quality on quality issues in cutting section" for the collecting Fabric inspection data of Meghna executive Holding ltd. In this project I prepared based Fabric Cutting procedure, Fabric ...
  • Study on Quality Issues in Knit Fabric 
    Sarkar, Abu Hossain; Rahman, Md. Minhazur; Antu, Md. Asif Sazzad (©Daffodil International University, 2020-11-04)
    The project is on the "Quality problems in Denim Production. This study examines what's vital for prime quality of Denim, and what processes and factors affects the intrinsic quality of the Denim material. supported this, ...
  • Study on quality management system and technical solution of Defects In Lingerie Unit 
    Sharif, Erfan Elahi (Daffodil International University, 2014-12)
    This project is on “Study on Defect analysis and technical solution of defects in lingerie Production”. Lingerie manufacturing is quite different from any other conventional manufacturing even different from another product ...
  • Study on Quality Problem in Polo Shirt Production with Their Remedies 
    Islam, Md. Mominur (Daffodil International University, 2019-12)
    Quality is defined as the level of acknowledgment of a not bad or services. Because the textile and garments industry, product quality is calculated in terms of quality and value of fibers, yarns, fabric construction, ...
  • Study on Quality Reports of Gray Fabric, Finish Fabric, Sewing & Finishing Quality Reports 
    Howlader, Rakib; Rahman, Tariqur; Billah, Md. Al-Muntasir (©Daffodil International University, 2021-03-30)
    This study on textile finishing low-cost fabric reduces the percentage of defects in the manufacturing process through process control parameters and it is well known that some possible steps to get the desired fabric ...
  • Study on Reports of GSM, Inspection, Shade and Shrinkage % for Three Buyers 
    Any, Afroza Akter; Shakil, Rasel Ahmed (Daffodil International University, 2022-03-30)
    In the garments industry, the fabric inspection procedure is one of the most crucial processes. Fabric flaws are a key criterion for fabric rejection. This project has provided us with a wealth of experience. We have ...
  • Study on Rope Denim 
    Nobi, Mohammad Mahmudun; Haque, MD Azizul; Islam, Redwanul (Daffodil International University, 2020-02-01)
    The thesis report entitled ‘Study on Rope Denim’ at Amber Denim Mills Limited. The main objective of the study is to analyze the process of rope denim. It is the process of how the rope denim is made, what the is process, ...
  • Study on Sample Development Plans for knit Garments 
    Hazari, Emon; Alam, P.M Shafaath (Daffodil International University, 23-03-12)
    Sample development is the first stage of an order confirmation from the buyer. The manufacturer faces a hurdle in producing the ideal sample clothing. The ability and identity of the maker to the buyer is demonstrated by ...
  • Study on selvedge wastage in Rapier Loom 
    Roy, Arpon; Rahman, Habibur (Daffodil International University, 2014-12)
    This paper present the analysis of waste% of selvedge in rapier loom used in Bangladesh. Woven fabric is produced by interlacement of warp and weft yarns. Construction of fabric is very important for woven fabric ...
  • Study on SMV and Capacity Calculation 
    Rifat, Abu Horaira; Alam, Mahbub (Daffodil International University, 2021)
    This thesis paper contains the overall procedure of SMV and operation Breakdown of the garments industry. We visited to Opex and Sinha Textile & Esquire Knit Composite Ltd. Collecting the SMV, production target, Efficiency% ...
  • Study on SMV and line balancing of garments 
    Zaman, Md.Tarek; Imtiaz, Md.Shamim; Motaleb, Md. Abdul (Daffodil International University, 2018-04-06)
    We completed our thesis on “Study on SMV and Line balancing of Garments”. This paper clearly explains the total operation of long sleeve shirt and SMV calculation. Total SMV of long sleeve shirt is 22.41 and we also done ...
  • Study on Spirality and Shrinkage of Knitted Fabric 
    Rahman, Md.Atikur; Ahmed, Nadim (Daffodil International University, 2019-08)
    The most common problems for knitted fabric are shrinkage and spirality due to their loop formation. In circular knitted fabrics spirality has an influence on the aesthetic and functional performance. The process in which ...
  • Study on squeezing machine in Knit dyeing industry 
    Khan, Md.Woahiduzzaman; Sorder, Pais Ali (Daffodil International University, 2018-04-15)
    Squeezing machine is used for extracting water from dyed fabric by squeezing through rollers having different pressure. Squeezer machine designed to extract water from piece goods treated in rope form. They are used as an ...
  • Study on stenter machine in Knit fabric finishing process 
    Hasan, MD. Tarek; Ria, Nazia Sultana (Daffodil International University, 2018-04-18)
    The aim of my research work was to “Study on Stenter Machine in knit dyeing Finishing Process”This study makes an assessment on the effect of stenter machines on knit fabric (single jersey, rib, interlock). To continue ...
  • Study on stentering machine in Knit Dyeing Industry 
    Avi, Sumon Biswas (Daffodil International University, 2014-12)
    This aim of the study is to know about stentering machine in knit dyeing industry in details. A lot of processes were observed to conduct this study. Specially the change of diameter and GSM were observed very cautiously. ...
  • Study on stoppage time in various circular weft knitting machine 
    Rana, Md. Sohel; Hasan, Md. Nahid; Hasan, Md. Jahid (Daffodil International University, 2018-12-26)
  • Study on Technical Textile with reference to “Home Textile” 
    Rasheduzzaman, Md.; Mahmud, Md. Sultan; Islam, Md. Monirul (Daffodil International University, 2012-07)
    Textile manufacturing is a major industrial production. It is based in the conversion of three types of fiber into yarn, then fabric, then textiles. A Technical textile is a textile product manufactured for non-aesthetic ...
  • Study on Test Requirements of Buyer for Jacket Garments 
    Sohad-Al-Fahad; Mimi, Jannatul Fatema (Daffodil International University, 2019-12-06)
    A thesis based on Test. Where test is important to know the condition of garments. And there have some standard like ISO, AATCC etc. In our paper there having different types of test. For different types of test have ...
  • Study on Testing Requirements of Denim Fabric 
    Asaduzzaman, Rony (Daffodil International University, 23-06-19)
    The project focuses on the fabric's testing needs. This study investigates the denim fabric test specifications. Based on this, reclamation statistics compilations, interviews, and good quality testing were produced in ...
  • Study on the Application of Industrial Engineering in Woven Garments 
    khan, Md.Mojibor Rahman; Jahan, Nusrat (Daffodil International University, 23-06-19)
    Garments training can't be finished without thesis paper. Since this industrial preparation limits the hole among hypothetical and viable information and make, we familiar with garments climate. We are grateful to be able ...

Search DSpace


Browse

My Account