DEPARTMENT OF TEXTILE ENGINEERING: Recent submissions

  • Development of a Fit Sample from Designer Sketch and Measurement Chart 
    Ali, Adnan Sanzid (Daffodil International University, 2024-12-30)
    This project involves performing all operations needed to develop a garment fit sample under a specific purchase order from a multinational fashion retailer named Hennes and Mauritz AB, popularly known as H&M, based in ...
  • Comparative Study on Dyeing Behavior of Different Shades of Reactive Dyes on Cotton Woven and Knit Fabrics 
    Badhon, Md. Shoun Islam (Daffodil International University, 2024-12-17)
    The present study explores the dyeing behavior of cotton woven and knit fabrics using reactive dyes at 3 different percentages of shade: 0.5%, 1.5%, and 3.0%. Six samples were prepared by dyeing three woven and three knit ...
  • Comparative Study On Slasher Denim &Rope Denim 
    Fahim, Mahmudul Hasan; Nandi, Chandan Kumar (Daffodil International University, 2024-11-23)
    During my tenure in the denim fabric industry, specifically within the warping division, I conducted an in-depth analysis of the production processes and discerned the necessity for rigorous assessment to enhance operational ...
  • Sustainable Menstrual Hygiene: . 
    Unknown author (Daffodil International University, 2024-11-23)
    This thesis explores the feasibility and effectiveness of utilizing banana fiber as a sustainable alternative for the production of sanitary pads. With a growing global awareness of the environmental impact associated with ...
  • Study on the Re-Use of Spent Bath of Scouring & Bleaching 
    Najuse, Md. Nahid; Hasan, Md. Jahid (Daffodil International University, 2024-09-08)
    This study delves into the pivotal processes of scouring and bleaching in textile manufacturing, elucidating their procedural intricacies, significance, and consequential impacts on fabric properties. Scouring, a foundational ...
  • Designing & Developing Outerwear from a Given Specification 
    Islam, Md. Rafiul; Miah, Ohid (Daffodil International University, 2024-09-08)
    This thesis explores the design and development of outerwear, specifically jackets, constructed from a specific 3-layer fabric composition. The outer layer consists of 100% T2T Polyester, while the inner layer consists of ...
  • Buyer Comment on Different Sample 
    Rahman, Mahfuzur (Daffodil International University, 2024-09-02)
    Before beginning mass production, an extremely significant sample of a garment is made. It recommends creating a prototype of the clothing item that must meet the buyer's requirements. One of the most important procedures ...
  • Design of Denim Jacket for Mannequin of Apparel Lab 
    Mahin, Shameen Yaser Al; Hasan, Khalid (Daffodil International University, 2024-06-05)
    In the Final Year Design Project, we develop a jacket for the mannequin of our apparel manufacturing lab. To develop the jacket first of all we design the jacket by studying the jacket design of different brand around the ...
  • Study on thermal properties of jute fabric intended to be used as the mid-layer of winter jacket 
    Sakib, Md. Shaharujjaman Khan; Jony, Md. Ziaur Rahman (Daffodil International University, 2024-07-14)
    The purpose of this study is to determine whether jute cloth is suitable for use as a mid-layer material in winter Jacket by examining its thermal qualities. Natural fibers like jute provide a sustainable substitute for ...
  • Study on Industrial Engineering in Lingerie garments Production 
    Raihan, Bipul (Daffodil International University, 2024-06-30)
    Bangladesh's ready-made garments (RMG) sector has the highest share of growth foreign exchange profits of any industry. The subject of this project is "Study on Industrial Engineering in Lingerie Garment Production". It ...
  • Study on the Merchandising Procedure of SRG Buyer for Woven Pants 
    Miya, Siyam (Daffodil International University, 2024-06-26)
    This research paper illustrates the entire process of merchandising woven clothing. The process of clothing merchandising involves numerous formal stages, which commence with the buyer's confirmation of the order and ...
  • Investigation on the Pre-shipment inspection (PSI) reports in denim garments production 
    Karmaker, Sukanto; Khan, Md. Rahat Hossain (Daffodil International University, 2024-06-24)
    This project is on “Investigation on the Pre-shipment inspection (PSI) report in denim garment production”. The primary focus of this project is final inspection, which is a crucial aspect of the woven industry. This ...
  • Study On Sample Development Procedure For Woven Items 
    Alam, Navid; Sarkar, Arup (Daffodil International University, 2024-06-14)
    Our thesis topic is “Sample development procedure of woven items”. A sample development process begins with the buyer's order confirmation. It is difficult for the manufacturer to make ideal sample garments. A sample order ...
  • Comparative Analysis of the Prices of Various Garment Types 
    Ayon, Nazmus Sadat; Johora, Fatema Tuj (Daffodil International University, 2024-03-31)
    This research looks at the differences in price for 13 shirts, 3 pants, and 5 shorts within the same brands. It aims to compare the costs of these clothing items across different sizes, styles, and materials offered by the ...
  • A Study on different types of knit fabric faults and their inspection. 
    Joy, Estiak Ahammed; Ahmad, Md.Ripon; Mia, Safayet Sajim (Daffodil International University, 2024-05-26)
    On this examination, many types of single and double jersey machine faults were completed, and this article is focused on wastage and how this type of fault can be reduced. We also focused on several types of issues that ...
  • Reuse of Denim Fabric 
    Rakib, Md.; Islam, Md. Minhajul (Daffodil International University, 2024-05-15)
    This thesis delves into the world of sustainable denim by examining the reuse of denim fabric in manufacturing. With a focus on both environmental and economic benefits, the research dissects various methods like upcycling, ...
  • High-Value Woven Fabric Exported from Bangladesh 
    Bhattacharjee, Shreerup; Kundu, Saju; Zihad, MD. Rakibul Hasan (Daffodil International University, 2024-05-14)
    This thesis aims to present a thorough analysis of Bangladesh's exports of high-value woven cloth. This study investigates the meaning and names of many categories of high-quality cloth by examining various theoretical ...
  • Comparative study on the final inspection of buying QC 
    Habib, Md. Ahasan; Roxy, Md. Shoeb Alom (Daffodil International University, 2024-05-14)
    Comparative study on the final inspection of buying QC" is the title of the paper. In the whole RMG industry, this project is the most significant. Using efficient quality control (QC) procedures is essential to guaranteeing ...
  • Investigation of Defects in Different Types of Samples 
    Hasan, Md. Siam; Jaman, Md. Shahadot (Daffodil International University, 2024-03-20)
    This project aims to investigate defects in various types of samples in the garment industry. A factory must demonstrate its work through sampling to receive an order for mass production. If an industry delivers samples ...
  • Study on Different Types of Denim & Knit Garments Faults and Their Remedies 
    Sarker, Nisat; Junayed, Md.; Islam, Sumyia (Daffodil International University, 2024-05-06)
    In apparel manufacturing, ensuring the quality of denim and knit garments is paramount for brand reputation and customer satisfaction. However, despite stringent quality control measures, faults can still occur during ...

Search DSpace


Browse

My Account