Department of Textile Engineering: Recent submissions

  • Study on the Effect of Bio-polishing on Knit Fabric Properties 
    Abir, Enamul Hasan; Khan, Md. Abir (Daffodil International University, 2022-03-30)
    The main purpose of this paper is to investigate the quality improvement based on before and after bio-polishing process on different types of fabrics. The research was done on s/jersey, 1x1 rib, single lacost and terry ...
  • Comparative Study Between Exhaust Method and Cold-pad Batch (CPB) Method for Dyeing 100% Cotton Fabric 
    Rounoque, K. M.; Sarkar, Amit Kumar; Karim, Reduanul (Daffodil International University, 2022-02-20)
    Dyeing is the operation of colorings or colors on cloth accouterments similar as filaments, yarns, and fabrics with the thing of achieving color with asked colorfastness. Dyeing is typically done in a special result ...
  • Studies on the Effect of Dyeing Polyester Fabric With Disperse Dye 
    Saha, Sourov Kumar; Huq, A.K.M. Mumeenul (Daffodil International University, 2022-01-30)
    The pH is a measure of how acidic/basic water is. The range of values is 0 to 14. 7 indicates neutral, below 7 indicates acidic, and over 7 indicates alkaline. Every chemical reaction works best at a specific pH, or ...
  • Comparative Study on Different Types of Sewing Faults for Different Factories 
    Islam, Md. Rakibul; Akhter, Forida; Karim, Rezaul; Ahammed, Md. Al Shafe (Daffodil International University, 2022-03-12)
    Now a days Garments defect is one of the most important factors of the apparel manufacturing industry because it creates a negative effect on actual productivity. This paper aims with Different types of Defects which are ...
  • Study on Reports of GSM, Inspection, Shade and Shrinkage % for Three Buyers 
    Any, Afroza Akter; Shakil, Rasel Ahmed (Daffodil International University, 2022-03-30)
    In the garments industry, the fabric inspection procedure is one of the most crucial processes. Fabric flaws are a key criterion for fabric rejection. This project has provided us with a wealth of experience. We have ...
  • Application of Industrial Engineering in Garments Sewing Floor 
    Hossain, Sulaiman; Ahmmed, Md. Tuhin (Daffodil International University, 2022-03-30)
    "Application of Industrial Engineering in Garments Sewing Floor" is the basis for this project. Method development is critical to any procedure's success if it leads to increased resource application by reducing or, if ...
  • Study on Waste Generation in Single Jersey Circular Knitting Machine 
    Islam, Md. Shafiul (Daffodil International University, 2021-12-25)
    The textile factory in Bangladesh, especially the knitwear industries, where a huge amount of knitted fabric is produced daily. There are also many kinds of raw materials such as yarns, different kinds of titration are ...
  • Study on Issues that Hamper the Workflow of a Merchandiser 
    Roy, Rajath; Hossain, Sakib (Daffodil International University, 2022-03-10)
    Merchandising is the department responsible for working as a bridge between buyer, manufacturer, and supplier. So merchandisers are capable on doing multitasking and schedule maintenance. But we are human beings, and a ...
  • Study on Finishing Method of a Knit Garments Industry 
    Chowdhury, Ahsan; Rupu, Rokea Akter (Daffodil International University, 2022-03-30)
    Now a days readymade garments exporting business is one of the revolutionary sectors in Bangladesh. This sector keeps the lion share of the GDP, gradually it is improving day by day that now Bangladesh is one of the top ...
  • Study on Quality Reports of Gray Fabric, Finish Fabric, Sewing & Finishing Quality Reports 
    Howlader, Rakib; Rahman, Tariqur; Billah, Md. Al-Muntasir (©Daffodil International University, 2021-03-30)
    This study on textile finishing low-cost fabric reduces the percentage of defects in the manufacturing process through process control parameters and it is well known that some possible steps to get the desired fabric ...
  • Investigation on the Criteria of the Order Rejection of Quotation 
    Sabuj, S.M Tarek Azad; Dipu, Shariful Alam (©Daffodil International University, 2021-03-30)
    This report is titled “Investigation on the criteria of the order rejection of Quotation’’. This project is the most important-of any-RMG industry. We know that for run a garments industry, order from buyer is the most ...
  • Defects of Woven Fabric and Their Remedies 
    Sikder, Md. Tamim Hussain; Hasan, Md. Babul (Daffodil International University, 2021-06)
    To finish our project job, we first collected some defected fabric pictures from TM Fashions and Shasha Denims Ltd's weaving floor, dyeing area, finishing floor, and inspection section. Then we divide the collected ...
  • Study on Different Types of Sewing Faults and Their Remedies 
    khan, Md. Nahiyan; Howlader, Md. Emran (©Daffodil International University, 2021-05-10)
    This venture is 'Study on quality control in sewing segment of Hop Lun BD Garment fabricating is very not quite the same as some other ordinary assembling. It's anything but a persistent creation strategy. Each style is ...
  • Study on Knit Garments Merchandising of Sainsbury’s buyer 
    Reza, Md. Safal Khan; Tarafder, Hosne Mobarak; Rahat, M. (©Daffodil International University, 2021-05-17)
    The Project on study on knit merchandising it’s based on the most important section in the knit industry. This section can compare with the hart of body. Without this section someone cannot get any order, and then it is ...
  • Study on Industrial Engineering in Woven Garments Production 
    Imran, Al; Ratul, Meherab Hossain (©Daffodil International University, 2021-05-22)
    The ready-made garments (RMG) of Bangladesh has got a more preponderant facet than any other sector in terms of growth and foreign exchange earnings. This project is on “Study on Industrial Engineering in Woven garments ...
  • Study on Industrial Engineering in Woven Garments Production 
    Imran, Al; Ratul, Meherab Hossain (©Daffodil International University, 2021-05-04)
    The ready-made garments (RMG) of Bangladesh has got a more preponderant facet than any other sector in terms of growth and foreign exchange earnings. This project is on “Study on Industrial Engineering in Woven garments ...
  • Study on Cutting and Sewing Defects in Knit Garments 
    Fahim, Md. Salman khan; Hasan, Md.Mahamudul (©Daffodil International University, 2021-06-17)
    I have visited a few Garments Industry and realized that sewing and cutting are vital to making a Garment. Sewing and cutting issues have a very follow the impact on Garments quality. A few flaws show significant ...
  • Study on Cutting and Sewing Defects in Knit Garments 
    Fahim, Md. Salman khan; Hasan, Md.Mahamudul (©Daffodil International University, 2021-06-17)
    I have visited a few Garments Industry and realized that sewing and cutting are vital to making a Garment. Sewing and cutting issues have a very follow the impact on Garments quality. A few flaws show significant ...
  • Industrial Engineering 
    Nishat, Rahanuba Tasnim; Rana, Md. Masud (Daffodil International University, 2021-04-17)
    This document deals with the general process for SMV and the clothing industry operating bulletin. Ha-Meem Group visited us. The Operation Bulletin is collected. In time study, production, capacity study, objective, ...
  • Study on the Denim Fabric Properties Changes Due to Different Washing Process 
    Rahman, Md. Mahabub; Ahsan, S.M Tohid; Roknuzzaman, Md. (Daffodil International University, 2021-03-03)
    For completing the project title as “Study on the Denim Fabric Properties changes due to different washing process” we have randomly selected three different types of denim fabric. These are Stretch Denim Fabric (82% ...

Search DSpace


Browse

My Account