Department of Textile Engineering: Recent submissions

  • Roy, Arpon; Rahman, Habibur (Daffodil International University, 2014-12)
    This paper present the analysis of waste% of selvedge in rapier loom used in Bangladesh. Woven fabric is produced by interlacement of warp and weft yarns. Construction of fabric is very important for woven fabric ...
  • Sibly Sadik, Md.; Shajidul Islam, Md.; Abu Sayem, Md. (Daffodil International University, 2014-11-06)
    The term textile means originally a woven fabric, but textile & the plural textiles are now also applied to fibre, filament & yarn. Natural & manufactured fibre & most products for which these are raw materials are called ...
  • Shajidul Islam, Md.; Sibly Sadik, Md. (Daffodil International University, 2014-12)
    Firstly we collected some defected fabric picture from the weaving floor, Dyeing section, finishing floor and the inspection section of Sim Fabrics Ltd and Shasha Denims Ltd to complete our project work. Then we separate ...
  • SADIKUL ISLAM, Md.; ASADUZZAMAN, Md. (Daffodil International University, 2014-12)
    Jute is a versatile vegetable fiber which is biodegradable and has the ability to mix with the soil and serve as a nutrient for vegetation. Their quick biodegradability becomes weakness for their use as a geo-textile. Jute ...
  • Avi, Sumon Biswas (Daffodil International University, 2014-12)
    This aim of the study is to know about stentering machine in knit dyeing industry in details. A lot of processes were observed to conduct this study. Specially the change of diameter and GSM were observed very cautiously. ...
  • Bakker Siddik, Abu (Daffodil International University, 2014-11-20)
    Textiles and garments sector is the biggest and fastest growing sector in Bangladesh. Textiles and clothing will always be essential goods for human beings. Spinning and weaving were the main activities that drove the ...
  • Maruf Bin Alam, Chowdhury; Ahmed, Foyeg; Sultana, Abir (Daffodil International University, 2014-12)
    This thesis presents an analysis and comparative study between conventional card and compact combed yarn on the properties of knitted fabrics. 30 Ne Card and 30 Ne compact Combed yarn have been used in this thesis which ...
  • Mahbub Hasan, Mir; Hasan, Enamul; Ashraful Amin, Md. (Daffodil International University, 2014-12)
    The study makes an assessment on water treatment plant that gives us knowledge about water treatment plant, temporary and permanent hardness of water, effect of hardness on fabric. To conduct this project work, we have ...
  • Ullah, Mohammad; Das, Amit; Morshed, Golam (Daffodil International University, 2014-12)
    This study makes an assessment on finding of knit fabric faults due to changing of Stitch Length. At the beginning, a brief introduction is given with suitable literature review. In this study we have done, A study on knit ...
  • Shahed Rezoun, Md. (Daffodil International University, 2014-12)
    We discussed the paper comparing the productivity and efficiency of Mondol Group, Hams Garments Ltd. and Fatullah Group after applying the industrial engineering. This is true today millions of dollars are wasted each and ...
  • Sibly Sadik, Md.; Shajidul Islam, Md. (Daffodil International University, 2014-12)
    Firstly we collected some defected fabric picture from the weaving floor, Dyeing section, finishing floor and the inspection section of Sim Fabrics Ltd and Shasha Denims Ltd to complete our project work. Then we separate ...
  • Sharif, Erfan Elahi (Daffodil International University, 2014-12)
    This project is on “Study on Defect analysis and technical solution of defects in lingerie Production”. Lingerie manufacturing is quite different from any other conventional manufacturing even different from another product ...
  • ATIKUR RAHAMAN, Md.; SADEK, KAMRAN; MAHBUBUR RAHMAN, Md. (Daffodil International University, 2014-12)
    This thesis presents an analysis and comparative study between open finish and tube finishon the properties of knitted fabrics . For this project work two types of yarn count (28 s/l Comb yarn for single jersey with m/c ...
  • TOHIDUR RAHMAN, Md.; MOSTAFA KAMAL, Md. (Daffodil International University, 2014-12-07)
    This project is on “Blend Dyeing on Cotton/Polyester fabric with disperse & reactive dye”.This is a dyeing process where polyester part with disperse dye and cotton part with reactive dye.The experiment was conducted in ...
  • EBADUL HAQUE, Md.; SUMSUDDHA, Md.; ASHRAFEE, TUSHER (Daffodil International University, 2014-08)
    The aim of this project is to represent the chemical consumption and operational cost of ETP plant in textile industry. The main objective is to compare the cost of ETP chemical for different ETP plant to choose effective ...
  • AKTER, YASMIN; REZANUL HASAN, Md.; FEROZ KABIR, SHAKIL MD (Daffodil International University, 2014-08)
    The word vat means, ‘Vessel’. The dyes take their name from vatting. The vat dyes are naturally coloring matter and kept in wooden vat and make solubilize vat dyes by the process of fermentation – so it is called vat dyes. ...
  • Parvej, Nadim (Daffodil International University, 2014-12-01)
    If the theoretical knowledge is a glass of water then the practical knowledge would be drinking of the water. It is always very easy to make a man understand about a firebox by showing and lighting practically rather than ...
  • Shamsul Haque, Md.; Ghos, Ripon Kumer (Daffodil International University, 2014-12)
    This report is titled “Report on Industrial Attachment at Meghna Knit Composite Ltd”. By achieving practical knowledge from the industrial attachment it is possible to apply the theoretical knowledge in the technical field. ...
  • Saddam Hossain, Md. (Daffodil International University, 2014-12)
    By means of practical knowledge it’s not possible to apply the theoretical knowledge in the practical field. For any technical education, practical experience is almost equaled important in association with the theoretical ...
  • Saiful Islam, Md.; Alauddin, G.M.; Zabed Chowdhury, Mohd. (Daffodil International University, 2014-11-03)
    The Industrial Attachment is the most effective way for Textile Engineering student to be achieved the knowledge about the practical field of the Textile Manufacturing. It brings an opportunity to all the learners to enrich ...

Search DSpace


Browse

My Account