DEPARTMENT OF ELECTRICAL & ELECTRONIC ENGINEERING: Recent submissions

  • Talukder, Md. Rajib; Emon, Najmul Hasan (Daffodil International University, 2020-09-30)
    Flywheel Energy Storage Systems (FESS) is a kind of flywheel quality that provides a way to improve the productivity of electrical frameworks in the presence of unequal characters in micropower generation and request. ...
  • Kumar, Subroto (Daffodil International University, 2020-10-18)
    In this paper, a new formation of modified T shape simple Microstrip patch antenna (MPA) is designed and analyzed for Wi-Fi applications. The proposed antenna operates between the frequencies of 4 GHz to 8 GHz with return ...
  • Hossain, Md. Saddam; Kaisar Ahmmed, Md. (Daffodil International University, 2020-10-18)
    Human fingerprints are rich in details called minutiae, which can be used as identification marks for fingerprint verification. The goal of this thesis to develop image quality through improves PSNR, MSE & SSIM for ...
  • Jony Ahamed, Md.; Alom, MD Shafiul (Daffodil International University, 2020-10-18)
    This paper reports the renewable energy resources and technology practices in Bangladesh. It also presents the present energy scenario, renewable energy resources and future prospect in Bangladesh. For achieving growth ...
  • Masud, Rayhan (Daffodil International University, 2020-10-18)
    In this paper, the proposed Ultra-Wideband RMPA is designed by introducing a new formation of modified and combined U and H shape slots in patch and two rectangular slots in ground plane in order to attain a wideband ...
  • Tarekul Islam; Sabbir Ahmed (Daffodil International University, 2020-01-12)
    With only 510 kWh per capita of electricity generation, Bangladesh is one of the world's energy-affected countries and only 94 percent of its population has access to that electricity. Bangladesh is still very early in ...
  • Jahidul Islam; Reza, Yasin (Daffodil International University, 2019-12-06)
    Solar power (CSP) is an exciting energy generation technology that concentrates solar radiation to produce high temperatures in a solar power plant to generate steam. In this process, no fossil fuel is used; therefore, ...
  • Habibur Rahman, Md.; Hridoy, Md. Ali (Daffodil International University, 2019-12-10)
    The aim of this project is studying MC CDMA system and use MATLAB to simulate the system and find the signal graphs at each part of the system , how the signal changes after coding and modulation , how the noise effect ...
  • Hossain, MD. Zubair; Rana, MD. Masud (Daffodil International University, 2020-01-11)
    In modern communication networks, the smart antenna has been one of the most applied technologies. Instead of conventional antennas, Smart antenna, which is also called a digitally beam-formed array. Antenna beamforming ...
  • Badsha, MD. Imran; Mahmud, Md. Nadim; Bakul, Md.Safayet Ahmed Safu (Daffodil International University, 2019-07-16)
    This paper presents the arrangement and diversions of a photovoltaic structure using trouble and watches methodology most extraordinary powerpoint following (MPPT) calculation with help converter. Furthermore, this paper ...
  • Shimu, Jannatul Ferdous; Pervin, Rikta (Daffodil International University, 2019-12-10)
    For permanent development of a country needs electricity in every moment. One of the major obstruction for economic development of Bangladesh is power crisis. At present the scenario of power generation all over the world ...
  • Jafroul Hasan, Md. (Daffodil International University, 2019-07-16)
    This report explains about the power plant which is use the diesel engine as the prime mover. This power plant need to output electric energy. Generally, it is used for heavy duty vehicles. It can also be used for power ...
  • Kaisar, Mobasshir; Shadman Al Sakib, Md. (Daffodil International University, 2020-01-10)
    The power division in Bangladesh is profoundly subject to non-renewable energy sources, as petroleum gas and coal are the commanding hotspots for control age in the nation. About 62.9% of Bangladeshi produced power ...
  • Hossain, Farhad; Uddin, Md. Raihan (Daffodil International University, 2019-11-25)
    The wired neighborhood is turning out to be remote step by step. The assignment of recurrence range for this Wireless LAN is diverse in various nations. This shows a horde of energizing chances and difficulties for plan ...
  • Ridoy Ahmed; Al-Amin (Daffodil International University, 2019-12-06)
    A rainstorm is fundamentally a tempest, described by lightning and thunder, lightning is a normally happening electrostatic release during which two electrically charged locales in the air or ground incidentally even out ...
  • Tofayel Ahmed, Md.; Hasan, Mohammad Mahedy (Daffodil International University, 2020-01-10)
    In this thesis the hydro potential suitable for electrical power generation available in coastal area of Bangladesh is Investigated and developed a model for total possible electrical power generation using tidal barrage ...
  • Hossain, MD. Shahed; Mahfuzul Hasan, MD.; Rahman, Habibur (Daffodil International University, 2020-01-01)
    A substation is a part of an electrical generation, transmission, and distribution system. Substations transform voltage from high to low, or the reverse, or perform any of several other important functions. Between the ...
  • Hossain, Rakib; Sarkar, Sabuj Kumer (Daffodil International University, 2020-01-10)
    Every project has fixed goal the main goal of this project is to detects the faults when Over voltage and short circuit occurs the circuit will automatically Trip. When we apply 220 volts at both step-down transformer ...
  • Mosharaf, Md. Parvez (Daffodil International University, 2020-01-10)
    This task gives the idea of using Programmable Logic controller PLC in Industrial Automation using PLC is a top aspect a virtual pc used for automation of everyday business electro- mechanical methods which include ...
  • Biswas, Razu; Ariful Islam (Daffodil International University, 2019-12-10)
    Our project name is a design and implementation of monitoring and survellence of BTS room in cellular network. The main purpose in our project is high protection of BTS room. Various kind of expensive electrical and ...

Search DSpace


Browse

My Account