Abstract:
In this project the gate will be controlled by a microcontroller which automatically opens, closes,
and signaling. There will be a signal on the road for vehicles when the train arrives. Then the rail
crossing will close. So, we used a weight sensor which increases the security of rail crossing a bit
more. When, the train passes over the weight sensor it will send a signal to the road. So that the
drivers of vehicles can understand the rail crossbar will be closed in a short while. But sometimes,
we do not notice the road signals due to our unconsciousness. So that time, if a vehicle gets stuck
at a rail crossing, a red light will flash on the rail line. So the train driver realizes that a vehicle is
stuck at the rail crossing. At the same time, one more signal will go to the control room, so that
this problem can be solved from the control room. After disconnecting the power from the control
room and restarting it, the rail crossing will be open and the vehicle stuck in the rail crossing will
be able to pass over the rail crossing. Then the train will be able to move easily to its own
destination.
