DSpace Repository

Automatic Railway Gate Control System

Show simple item record

dc.contributor.author Mortoza, Md. Sayed
dc.contributor.author Hasan, Md. Maruf
dc.date.accessioned 2022-02-19T11:57:02Z
dc.date.available 2022-02-19T11:57:02Z
dc.date.issued 2021-01
dc.identifier.uri http://dspace.daffodilvarsity.edu.bd:8080/handle/123456789/7199
dc.description.abstract In this project the gate will be controlled by a microcontroller which automatically opens, closes, and signaling. There will be a signal on the road for vehicles when the train arrives. Then the rail crossing will close. So, we used a weight sensor which increases the security of rail crossing a bit more. When, the train passes over the weight sensor it will send a signal to the road. So that the drivers of vehicles can understand the rail crossbar will be closed in a short while. But sometimes, we do not notice the road signals due to our unconsciousness. So that time, if a vehicle gets stuck at a rail crossing, a red light will flash on the rail line. So the train driver realizes that a vehicle is stuck at the rail crossing. At the same time, one more signal will go to the control room, so that this problem can be solved from the control room. After disconnecting the power from the control room and restarting it, the rail crossing will be open and the vehicle stuck in the rail crossing will be able to pass over the rail crossing. Then the train will be able to move easily to its own destination. en_US
dc.language.iso en_US en_US
dc.publisher Daffodil International University en_US
dc.subject Automation system en_US
dc.subject Microcontroller en_US
dc.subject Signals en_US
dc.subject Gate control system en_US
dc.title Automatic Railway Gate Control System en_US
dc.type Article en_US


Files in this item

This item appears in the following Collection(s)

Show simple item record

Search DSpace


Browse

My Account